[U-Boot-Users] RE: How to obtain patches?

[U-Boot-Users] RE: How to obtain patches?

[Peter Pearse]

Umar Qureshey wrote:
> Hi,
> 
> I have an ARM Integrator/CP which has the embedded environment
> problem for which you have posted patches.  You mention that
> "previous patches 009 - 015" are also necessary for this patch to
> apply.  Question is how do I get those previous patches and this one
> also?   
> 
> Thanks,
> Umar

http://blog.gmane.org/gmane.comp.boot-loaders.u-boot

Search for words:: [PATCH]
Written by:: Peter Pearse

to get the patches.

Get all the patches before applying any and check any responses.

My records show 015 replaces 014. 

Regards

Peter


-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.

[U-Boot-Users] Re: How to obtain patches?

[Umar Qureshey]

Peter Pearse wrote:

>Umar Qureshey wrote:
>  
>
>>Hi,
>>
>>I have an ARM Integrator/CP which has the embedded environment
>>problem for which you have posted patches.  You mention that
>>"previous patches 009 - 015" are also necessary for this patch to
>>apply.  Question is how do I get those previous patches and this one
>>also?   
>>
>>Thanks,
>>Umar
>>    
>>
>
>http://blog.gmane.org/gmane.comp.boot-loaders.u-boot
>
>Search for words:: [PATCH]
>Written by:: Peter Pearse
>
>to get the patches.
>
>Get all the patches before applying any and check any responses.
>
>My records show 015 replaces 014. 
>
>Regards
>
>Peter
>
>  
>
Hi,

I obtained the u-boot from www.arm.com (U-Boot_34x).  Since the last 
patch (# 15) was applied some time back  in Nov of 2005 then it should 
be part of the u-boot source from arm by now.  Is this correct?  I 
applied just the Integrator/CP environment patch in a dry-run to 
U-Boot_34x and it applied with no errors.

Regards,
Umar

[U-Boot-Users] RE: How to obtain patches?

[Peter Pearse]

Umar Qureshey wrote:
> I obtained the u-boot from www.arm.com (U-Boot_34x).  Since the last
> patch (# 15) was applied some time back  in Nov of 2005 then it
> should be part of the u-boot source from arm by now.  Is this
> correct?  

Yes the source code from www.arm.com is patched up to my patch 015.
However, be aware that this will be lacking all the changes to the U-Boot
made for
general areas of the code and all non ARM supplied and supported boards
since
mid December 2005. 

I'll make a note to ensure the next source code bundle is more precise about

the GIT basis of the code.

Regards

Peter