* [U-Boot-Users] AMCC Luan BDI2000 Config File
2006-02-27 1:18 ` John Otken
@ 2006-03-13 1:48 ` Jeff Stevens
2006-03-13 21:57 ` Jon Loeliger
0 siblings, 1 reply; 4+ messages in thread
From: Jeff Stevens @ 2006-03-13 1:48 UTC (permalink / raw)
To: u-boot
Thanks for the files John! What DDR2 memory
configuration is this for (DIMM size, manufacturer,
part number, etc)? I have the Luan board booting
until it relocates into ram, but it never reaches
board_init_r. I'm wondering if we have different
modules. Also, does anyone know if U-Boot is going
to eventually support SPD for DDR2?
Thanks,
Jeff Stevens
--- John Otken <jotken@softadvances.com> wrote:
> > Does anyone know where I can get a BDI2000 config
> file
> > for AMCC's Luan eval board, and a BDI2000 reg
> file for
> > the 440SP?
>
>
> 06/07/2005 01:03 PM 6,332 evb440sp.cfg
> 05/30/2005 03:39 PM 11,612 reg440sp.def
>
>
> Here evb440sp.cfg (page down for reg440sp.def):
>
>
> ;bdiGDB configuration file for AMCC 440SP LUAN 2
> Board
> ;
> ----------------------------------------------------
> ;
> [INIT]
> ; Setup TLB
> WTLB 0xF0000095 0x1F00003F ;Boot Space 256MB
> (Flash,SRAM,EPLD)
> WTLB 0x00000094 0x0000003F ;SDRAM 256MB @
> 0x00000000
> WTLB 0x10000094 0x0100003F ;SDRAM 256MB @
> 0x10000000
> ;
> ; Setup caches
> WSPR 0x370 0x00000000 ;INV0
> WSPR 0x371 0x00000000 ;INV1
> WSPR 0x372 0x00000000 ;INV2
> WSPR 0x373 0x00000000 ;INV3
> WSPR 0x374 0x00000000 ;ITV0
> WSPR 0x375 0x00000000 ;ITV1
> WSPR 0x376 0x00000000 ;ITV2
> WSPR 0x377 0x00000000 ;ITV3
> WSPR 0x390 0x00000000 ;DNV0
> WSPR 0x391 0x00000000 ;DNV1
> WSPR 0x392 0x00000000 ;DNV2
> WSPR 0x393 0x00000000 ;DNV3
> WSPR 0x394 0x00000000 ;DTV0
> WSPR 0x395 0x00000000 ;DTV1
> WSPR 0x396 0x00000000 ;DTV2
> WSPR 0x397 0x00000000 ;DTV3
> WSPR 0x398 0x0001f800 ;DVLIM
> WSPR 0x399 0x0001f800 ;IVLIM
> ;
> ; Setup Peripheral Bus
> WDCR 0x12 0x00000010 ;Select EBC0_B0AP
> WDCR 0x13 0x03800000 ;B0AP: Flash and SRAM
> WDCR 0x12 0x00000000 ;Select EBC0_B0CR
> WDCR 0x13 0xFFE38000 ;B0CR: 2MB at 0xFFE00000, r/w,
> 8bit
> ;
> WDCR 0x12 0x00000011 ;Select EBC0_B1AP
> WDCR 0x13 0x02095a40 ;B1AP: EPLD and FRAM
> WDCR 0x12 0x00000001 ;Select EBC0_B1CR
> WDCR 0x13 0xf8018000 ;B1CR: 1MB at 0xF8000000, r/w,
> 8bit
> ;
> WDCR 0x12 0x00000012 ;Select EBC0_B2AP
> WDCR 0x13 0x03800000 ;B2AP: 4 MB Flash
> WDCR 0x12 0x00000002 ;Select EBC0_B2CR
> WDCR 0x13 0xff858000 ;B2CR: 4MB at 0xFF800000, r/w,
> 8bit
> ;
> ; Setup DDR2 Controller
> WDCR 0x10 0x00000021 ;Select MCIF0_MCOPT2
> WDCR 0x11 0x84000000 ;MCOPT2: Clear DCEN BIT
> WDCR 0x10 0x00000020 ;Select MCIF0_MCOPT1
> WDCR 0x11 0x2D122000 ;MCOPT1: ECC OFF,64 bits,4
> banks,DDR2
> WDCR 0x10 0x00000026 ;Select MCIF0_CODT
> WDCR 0x11 0x00800026 ;CODT: Die Termination On
> WDCR 0x10 0x00000081 ;Select MCIF0_WRDTR
> WDCR 0x11 0x82000800 ;WRDTR: Write DQS Adv 90 +
> Fractional DQS Delay
> WDCR 0x10 0x00000080 ;Select MCIF0_CLKTR
> WDCR 0x11 0x80000000 ;CLKTR: Adv Addr clock by 180
> deg
> WDCR 0x10 0x00000040 ;Select MCIF0_MB0CF
> WDCR 0x11 0x00000201 ;MB0CF: Turn on CS0, N x 10
> coll
> WDCR 0x10 0x00000044 ;Select MCIF0_MB1CF
> WDCR 0x11 0x00000201 ;MB1CF: Turn on CS0, N x 10
> coll
> WDCR 0x10 0x00000030 ;Select MCIF0_RTR
> WDCR 0x11 0x08200000 ;RTR: Refresh every 7.8125uS
> WDCR 0x10 0x00000085 ;Select MCIF0_SDTR1
> WDCR 0x11 0x80201000 ;SDTR1: Timing Register 1
> WDCR 0x10 0x00000086 ;Select MCIF0_SDTR2
> WDCR 0x11 0x42103242 ;SDTR2: Timing Register 2
> WDCR 0x10 0x00000087 ;Select MCIF0_SDTR3
> WDCR 0x11 0x0C100D14 ;SDTR3: Timing Register 3
> WDCR 0x10 0x00000088 ;Select MCIF0_MMODE
> WDCR 0x11 0x00000642 ;MMODE: CAS = 4 cycles
> WDCR 0x10 0x00000089 ;Select MCIF0_MEMODE
> WDCR 0x11 0x00000400 ;MEMODE: Diff DQS disabled, ODT
> term disabled
> ;
> WDCR 0x10 0x00000050 ;Select MCIF0_INITPLR0
> WDCR 0x11 0x81b80000 ;INITPLR0: NOP
> WDCR 0x10 0x00000051 ;Select MCIF0_INITPLR1
> WDCR 0x11 0x82100400 ;INITPLR1: PRE
> WDCR 0x10 0x00000052 ;Select MCIF0_INITPLR2
> WDCR 0x11 0x80820000 ;INITPLR2: EMR2
> WDCR 0x10 0x00000053 ;Select MCIF0_INITPLR3
> WDCR 0x11 0x80830000 ;INITPLR3: EMR3
> WDCR 0x10 0x00000054 ;Select MCIF0_INITPLR4
> WDCR 0x11 0x80810000 ;INITPLR4: EMR DLL ENABLE
> WDCR 0x10 0x00000055 ;Select MCIF0_INITPLR5
> WDCR 0x11 0x80800542 ;INITPLR5: MR DLL RESET
> WDCR 0x10 0x00000056 ;Select MCIF0_INITPLR6
> WDCR 0x11 0x82100400 ;INITPLR6: PRE
> WDCR 0x10 0x00000057 ;Select MCIF0_INITPLR7
> WDCR 0x11 0x99080000 ;INITPLR7: Refresh
> WDCR 0x10 0x00000058 ;Select MCIF0_INITPLR8
> WDCR 0x11 0x99080000 ;INITPLR8: Refresh
> WDCR 0x10 0x00000059 ;Select MCIF0_INITPLR9
> WDCR 0x11 0x99080000 ;INITPLR9: Refresh
> WDCR 0x10 0x0000005A ;Select MCIF0_INITPLR10
> WDCR 0x11 0x99080000 ;INITPLR10: Refresh
> WDCR 0x10 0x0000005B ;Select MCIF0_INITPLR11
> WDCR 0x11 0x80800442 ;INITPLR11: MR
> WDCR 0x10 0x0000005C ;Select MCIF0_INITPLR12
> WDCR 0x11 0x80810380 ;INITPLR12: EMR OCD Default
> WDCR 0x10 0x0000005D ;Select MCIF0_INITPLR13
> WDCR 0x11 0x80810000 ;INITPLR12: EMR OCD Exit
> DELAY 10
> ;
> WDCR 0x10 0x00000021 ;Select MCIF0_MCOPT2
> WDCR 0x11 0x28000000 ;MCOPT2: Execute Preloaded
> Initialization Sequence, set DC_EN
> DELAY 100
> ;
> WDCR 0x40 0x0000F800 ;MQ0_B0BAS: Base Address
> 0x00000000 / Size 256 MB
> WDCR 0x41 0x1000F800 ;MQ0_B1BAS: Base Address
> 0x10000000 / Size 256 MB
> ;
> WDCR 0x10 0x00000078 ;Select MCIF0_RDCC
> WDCR 0x11 0x00000000 ;RDCC: Auto Set Read Stage
> WDCR 0x10 0x00000070 ;Select MCIF0_RQDC
> WDCR 0x11 0x8000003A ;RQDC: Read DQS Delay Control
> Enabled + Fractional DQS Delay
> WDCR 0x10 0x00000074 ;Select MCIF0_RFDC
> WDCR 0x11 0x00000200 ;RFDC: 2 clock feedback delay
> ;
>
>
> [TARGET]
> JTAGCLOCK 0 ;use 16 MHz JTAG
> clock
> CPUTYPE 440 ;the used target CPU type
> SCANMISC 8 ;IR length is 8 bits
> for 440SP
> WAKEUP 50 ;wakeup time after
> reset
> BREAKMODE SOFT ;SOFT or HARD, HARD
> uses PPC hardware breakpoint
> STEPMODE HWBP ;JTAG or HWBP, HWBP
> uses one or two hardware breakpoints
>
>
> [HOST]
> IP 151.120.25.119
> FILE E:\cygwin\home\demo\mpc860\fibo.elf
> FORMAT ELF
> DUMP E:\temp\dump.bin
> PROMPT 440SP>
>
>
> [FLASH]
> ; program large 4MB Flash (AM29LV033C) at 0xff800000
> WORKSPACE 0xFFE00000 ;workspace in SRAM for fast
> programming algorithm
> CHIPTYPE AM29F ;Flash type
> CHIPSIZE 0x400000 ;The size of one flash chip
> in bytes
> BUSWIDTH 8 ;The width of the flash
> memory bus in bits (8 | 16 | 32)
> FILE E:\temp\dump256k.bin
> FORMAT BIN 0xFF800000
> ERASE 0xFF800000 ;erase sector 0 of flash
> (AM29LV033C)
> ERASE 0xFF810000 ;erase sector 1 of flash
> ERASE 0xFF820000 ;erase sector 2 of flash
> ERASE 0xFF830000 ;erase sector 3 of flash
> ERASE 0xFF840000 ;erase sector 4 of flash
> ERASE 0xFF850000 ;erase sector 5 of flash
> ERASE 0xFF860000 ;erase sector 6 of flash
> ERASE 0xFF870000 ;erase sector 7 of flash
>
>
> [REGS]
> IDCR1 0x00C 0x00D ;CPR0_CFGADDR and CPR0_CFGDATA
> IDCR2 0x00E 0x00F ;SDR0_CFGADDR and SDR0_CFGDATA
> IDCR3 0x010 0x011 ;MCIF0_CFGADDR and MCIF0_CFGDATA
> IDCR4 0x012 0x013 ;EBC0_CFGADDR and EBC0_CFGDATA
> FILE $reg440sp.def
>
>
>
> And here's reg440sp.def:
>
> ;Register definition for PPC440SP
> ;================================
> ;
> ; name: user defined name of the register
> ; type: the type of the register
> ; GPR general purpose register
> ; SPR special purpose register
> ; MM memory mapped register
> ; DMMx direct memory mapped register with offset
> ; x = 1..4
> ; the base is defined in the configuration file
> ; e.g. DMM1 0x02200000
> ; IDCRx indirect accessed DCR's
> ; x = 1..4
> ; the addr and data DCR is defined in the
> configuration file
> ; e.g. IDCR1 0x010 0x011
> ; addr: the number, adddress or offset of the
> register
> ; size the size of the register (8,16 or 32)
> ;
> ;name type addr size
> ;-------------------------------------------
> ;
> sp GPR 1
> ;
> ; Special Purpose Registers
> ;
> xer SPR 0x001
> lr SPR 0x008
> ctr SPR 0x009
> dec SPR 0x016
> srr0 SPR 0x01a
> srr1 SPR 0x01b
> pid SPR 0x030
> decar SPR 0x036
> csrr0 SPR 0x03a
> csrr1 SPR 0x03b
> dear SPR 0x03d
> esr SPR 0x03e
> ivpr SPR 0x03f
> usprg0 SPR 0x100
> sprg4r SPR 0x104
> sprg5r SPR 0x105
> sprg6r SPR 0x106
> sprg7r SPR 0x107
> tblr SPR 0x10c
> tbur SPR 0x10d
> sprg0 SPR 0x110
> sprg1 SPR 0x111
> sprg2 SPR 0x112
> sprg3 SPR 0x113
> sprg4w SPR 0x114
> sprg5w SPR 0x115
> sprg6w SPR 0x116
> sprg7w SPR 0x117
> tblw SPR 0x11c
> tbuw SPR 0x11d
> pir SPR 0x11e
> pvr SPR 0x11f
> dbsr SPR 0x130
> dbcr0 SPR 0x134
> dbcr1 SPR 0x135
> dbcr2 SPR 0x136
> iac1 SPR 0x138
> iac2 SPR 0x139
> iac3 SPR 0x13a
> iac4 SPR 0x13b
> dac1 SPR 0x13c
> dac2 SPR 0x13d
> dvc1 SPR 0x13e
> dvc2 SPR 0x13f
> tsr SPR 0x150
> tcr SPR 0x154
> ivor0 SPR 0x190
> ivor1 SPR 0x191
> ivor2 SPR 0x192
> ivor3 SPR 0x193
> ivor4 SPR 0x194
> ivor5 SPR 0x195
> ivor6 SPR 0x196
> ivor7 SPR 0x197
> ivor8 SPR 0x198
> ivor9 SPR 0x199
> ivor10 SPR 0x19a
> ivor11 SPR 0x19b
> ivor12 SPR 0x19c
> ivor13 SPR 0x19d
> ivor14 SPR 0x19e
> ivor15 SPR 0x19f
> mcsrr0 SPR 0x23a
> mcsrr1 SPR 0x23b
> mcsr SPR 0x23c
> inv0 SPR 0x370
> inv1 SPR 0x371
> inv2 SPR 0x372
> inv3 SPR 0x373
> itv0 SPR 0x374
> itv1 SPR 0x375
> itv2 SPR 0x376
> itv3 SPR 0x377
> ccr1 SPR 0x378
> dnv0 SPR 0x390
> dnv1 SPR 0x391
> dnv2 SPR 0x392
> dnv3 SPR 0x393
> dtv0 SPR 0x394
> dtv1 SPR 0x395
> dtv2 SPR 0x396
> dtv3 SPR 0x397
> dvlim SPR 0x398
> ivlim SPR 0x399
> rstcfg SPR 0x39b
> dcdbtrl SPR 0x39c
> dcdbtrh SPR 0x39d
> icdbtrl SPR 0x39e
> icdbtrh SPR 0x39f
> mmucr SPR 0x3b2
> ccr0 SPR 0x3b3
> icdbdr SPR 0x3d3
> dbdr SPR 0x3f3
> ;
> ; Directly Accessed DCR's
> ;
> cpr0_cfgaddr DCR 0x00C ;Clocking
> Configuration Address Register
> cpr0_cfgdata DCR 0x00D ;Clocking
> Configuration Data Register
> sdr0_cfgaddr DCR 0x00E ;System DCR
> Configuration Address Register
> sdr0_cfgdata DCR 0x00F ;System DCR
> Configuration Data Register
> mcif0_cfgaddr DCR 0x010 ;Memory Controller
> Configuration Address
> mcif0_cfgdata DCR 0x011 ;Memory Controller
> Configuration Data
> ebc0_cfgaddr DCR 0x012 ;EBC0 Configuration
> Address
> ebc0_cfgdata DCR 0x013 ;EBC0 Configuration
> Data
> ;
> ; Internal SRAM Controller
> ;
> sram0_sb0cr DCR 0x020
> sram0_sb1cr DCR 0x021
> sram0_sb2cr DCR 0x022
> sram0_sb3cr DCR 0x023
> sram0_bear DCR 0x024
> sram0_besr0 DCR 0x025
> sram0_besr1 DCR 0x026
> sram0_pmeg DCR 0x027
> sram0_cid DCR 0x028
> sram0_revid DCR 0x029
> sram0_dpc DCR 0x0a0
> ;
> ; Level 2 cache
> ;
> l2c0_cfg DCR 0x030
> l2c0_cmd DCR 0x031
> l2c0_addr DCR 0x032
> l2c0_data DCR 0x033
> l2c0_sr DCR 0x034
> l2c0_revid DCR 0x035
> l2c0_snp0 DCR 0x036
> l2c0_snp1 DCR 0x037
> ;
> ; Memory Queue
> ;
> mq0_b0bas DCR 0x0040
> mq0_b1bas DCR 0x0041
> mq0_bauh DCR 0x0043
> mq0_cf1h DCR 0x0045
> mq0_esh DCR 0x0047
> mq0_eauh DCR 0x0048
> mq0_ealh DCR 0x0049
> mq0_baul DCR 0x004A
> mq0_cf1l DCR 0x004B
> mq0_esl DCR 0x004C
> mq0_eaul DCR 0x004D
> mq0_eall DCR 0x004E
> mq0_cfbhl DCR 0x004F
> ;
> ; I2O/DMA
> ;
> i2o0_llirq0l DCR 0x0060
> i2o0_llirq0h DCR 0x0061
> i2o0_llwr0m DCR 0x0062
> i2o0_llirq1l DCR 0x0063
> i2o0_llirq1h DCR 0x0064
> i2o0_llwr1m DCR 0x0065
> i2o0_ibal DCR 0x0066
> i2o0_ibah DCR 0x0067
> i2o0_dma0_st DCR 0x0068
> i2o0_dma1_st DCR 0x0069
> i2o0_istat DCR 0x006A
> i2o0_dma0_op DCR 0x006B
> i2o0_dma1_op DCR 0x006C
> i2o0_seat DCR 0x006D
> i2o0_sead DCR 0x006E
> i2o0_i2o_op DCR 0x006F
> i2o0_hwr0l DCR 0x0070
> i2o0_hwr0h DCR 0x0071
> i2o0_hwrom DCR 0x0072
> i2o0_hwr1l DCR 0x0073
> i2o0_hwr1h DCR 0x0074
> i2o0_hwr1m DCR 0x0075
> i2o0_miscc DCR 0x0076
> ;
> ; PLB Crossbar Arbiter Registers
> ;
> plb_revid DCR 0x0080
> plb0_acr DCR 0x0081
> plb0_besrl DCR 0x0082
> plb0_besrh DCR 0x0083
> plb0_bearl DCR 0x0084
> plb0_bearh DCR 0x0085
> plb_ccr DCR 0x0088
> plb1_acr DCR 0x0089
> plb1_besrl DCR 0x008A
> plb1_besrh DCR 0x008B
> plb1_bearl DCR 0x008C
> plb1_bearh DCR 0x008D
> ;
> ; PLB to OPB bridge Registers
> ;
> pob0_besr0 DCR 0x0090
> pob0_bearl DCR 0x0092
> pob0_bearh DCR 0x0093
> pob0_besr1 DCR 0x0094
> pob0_confg DCR 0x0096
> pob0_latency DCR 0x0098
> pob0_revid DCR 0x009A
> ;
> ; Universal Interrupt Controllers
> ;
> uic0_sr DCR 0x0c0
> uic0_er DCR 0x0c2
> uic0_cr DCR 0x0c3
> uic0_pr DCR 0x0c4
> uic0_tr DCR 0x0c5
> uic0_msr DCR 0x0c6
> uic0_vr DCR 0x0c7
> uic0_vcr DCR 0x0c8
> uic1_sr DCR 0x0d0
> uic1_er DCR 0x0d2
> uic1_cr DCR 0x0d3
> uic1_pr DCR 0x0d4
> uic1_tr DCR 0x0d5
> uic1_msr DCR 0x0d6
> uic1_vr DCR 0x0d7
> uic1_vcr DCR 0x0d8
> ;
> ; Clocking and Power Management
> ;
> cpm0_er DCR 0x0e0
> cpm0_fr DCR 0x0e1
> cpm0_sr DCR 0x0e2
> ;
> ; Memory Access Layer
> ;
> mal0_cfg DCR 0x0180
> mal0_esr DCR 0x0181
> mal0_ier DCR 0x0182
> mal0_txcasr DCR 0x0184
> mal0_txcarr DCR 0x0185
> mal0_txeobisr DCR 0x0186
> mal0_txdeir DCR 0x0187
> mal0_txtattrr DCR 0x0188
> mal0_txbaddr DCR 0x0189
> mal0_rxcasr DCR 0x0190
> mal0_rxcarr DCR 0x0191
> mal0_rxeobisr DCR 0x0192
> mal0_rxdeir DCR 0x0193
> mal0_rxtattrr DCR 0x0194
> mal0_rxbaddr DCR 0x0195
> mal0_txctp0r DCR 0x01A0
> mal0_rxctp0r DCR 0x01C0
> mal0_rcbs0 DCR 0x01E0
> ;
> ;
> ; Indirectly Accessed DCR's
> ;
> ; IDCR1 must be set to CPR0_CFGADDR and
> CPR0_CFGDATA
> ; IDCR2 must be set to SDR0_CFGADDR and
> SDR0_CFGDATA
> ; IDCR3 must be set to MCIF0_CFGADDR and
> MCIF0_CFGDATA
> ; IDCR4 must be set to EBC0_CFGADDR and
> EBC0_CFGDATA
> ;
> ;
> ; Clocking and PowerOn Reset DCR
> ;
> cpr0_clkupd IDCR1 0x0020
> cpr0_pllc IDCR1 0x0040
> cpr0_plld IDCR1 0x0060
> cpr0_primad IDCR1 0x0080
> cpr0_primbd IDCR1 0x00A0
> cpr0_opbd IDCR1 0x00C0
> cpr0_perd IDCR1 0x00E0
> cpr0_mald IDCR1 0x0100
> cpr0_icfg IDCR1 0x0140
> ;
> ;
> ; System DCR
> ;
> sdr0_sdstp0 IDCR2 0x0020
> sdr0_sdstp1 IDCR2 0x0021
> sdr0_sdstp2 IDCR2 0x0022
> sdr0_sdstp3 IDCR2 0x0023
> sdr0_pinstp IDCR2 0x0040
> sdr0_sdcs IDCR2 0x0060
> sdr0_ecid0 IDCR2 0x0080
> sdr0_ecid1 IDCR2 0x0081
> sdr0_ecid2 IDCR2 0x0082
> sdr0_jtag IDCR2 0x00C0
> sdr0_ddrdl IDCR2 0x00E1
> sdr0_uart0 IDCR2 0x0120
> sdr0_uart1 IDCR2 0x0121
> sdr0_uart2 IDCR2 0x0122
> sdr0_cp440 IDCR2 0x0180
> sdr0_xcr0 IDCR2 0x01C0
> sdr0_xpllc0 IDCR2 0x01C1
> sdr0_xplld0 IDCR2 0x01C2
> sdr0_xcr1 IDCR2 0x01C3
> sdr0_xpllc1 IDCR2 0x01C4
> sdr0_xplld1 IDCR2 0x01C5
> sdr0_xcr2 IDCR2 0x01C6
> sdr0_xpllc2 IDCR2 0x01C7
> sdr0_xplld2 IDCR2 0x01C8
> sdr0_srst IDCR2 0x0200
> sdr0_slpipe IDCR2 0x0220
> sdr0_amp0 IDCR2 0x0240
> sdr0_amp1 IDCR2 0x0241
> sdr0_mirq0 IDCR2 0x0260
> sdr0_mirq1 IDCR2 0x0261
> sdr0_maltbl IDCR2 0x0280
> sdr0_malrbl IDCR2 0x02A0
> sdr0_maltbs IDCR2 0x02C0
> sdr0_malrbs IDCR2 0x02E0
> sdr0_cust0 IDCR2 0x4000
> sdr0_sdstp4 IDCR2 0x4001
> sdr0_cust1 IDCR2 0x4002
> sdr0_sdstp5 IDCR2 0x4003
> sdr0_cust2 IDCR2 0x4004
> sdr0_sdstp6 IDCR2 0x4005
> sdr0_cust3 IDCR2 0x4006
> sdr0_sdstp7 IDCR2 0x4007
> sdr0_pfc0 IDCR2 0x4100
> sdr0_pfc1 IDCR2 0x4101
> sdr0_plbtr IDCR2 0x4200
> sdr0_mfr IDCR2 0x4300
> ;
> ;
> ; DDR-SDRAM Controller DCRs
> ;
> mcif0_mcstat IDCR3 0x0014
> mcif0_mcopt1 IDCR3 0x0020
> mcif0_mcopt2 IDCR3 0x0021
> mcif0_modt0 IDCR3 0x0022
> mcif0_modt1 IDCR3 0x0023
> mcif0_codt IDCR3 0x0026
> mcif0_vvpr IDCR3 0x0027
> ;mcif0_opar1 IDCR3 0x0028
> ;mcif0_opar2 IDCR3 0x0029
> mcif0_rtr IDCR3 0x0030
> mcif0_pmit IDCR3 0x0034
> mcif0_mb0cf IDCR3 0x0040
> mcif0_mb1cf IDCR3 0x0044
> mcif0_initplr0 IDCR3 0x0050
> mcif0_initplr1 IDCR3 0x0051
> mcif0_initplr2 IDCR3 0x0052
> mcif0_initplr3 IDCR3 0x0053
> mcif0_initplr4 IDCR3 0x0054
> mcif0_initplr5 IDCR3 0x0055
> mcif0_initplr6 IDCR3 0x0056
> mcif0_initplr7 IDCR3 0x0057
> mcif0_initplr8 IDCR3 0x0058
> mcif0_initplr9 IDCR3 0x0059
> mcif0_initplr10 IDCR3 0x005A
> mcif0_initplr11 IDCR3 0x005B
> mcif0_initplr12 IDCR3 0x005C
> mcif0_initplr13 IDCR3 0x005D
> mcif0_initplr14 IDCR3 0x005E
> mcif0_initplr15 IDCR3 0x005F
> mcif0_rqdc IDCR3 0x0070
> mcif0_rfdc IDCR3 0x0074
> mcif0_rdcc IDCR3 0x0078
> mcif0_dlcr IDCR3 0x007A
> mcif0_clktr IDCR3 0x0080
> mcif0_wrdtr IDCR3 0x0081
> mcif0_sdtr1 IDCR3 0x0085
> mcif0_sdtr2 IDCR3 0x0086
> mcif0_sdtr3 IDCR3 0x0087
> mcif0_mmode IDCR3 0x0088
> mcif0_memode IDCR3 0x0089
> mcif0_ecces IDCR3 0x0098
> ;
> ;
> ; External Bus Controller DCRs
> ;
> ebc0_b0cr IDCR4 0x00
> ebc0_b1cr IDCR4 0x01
> ebc0_b2cr IDCR4 0x02
> ebc0_b0ap IDCR4 0x10
> ebc0_b1ap IDCR4 0x11
> ebc0_b2ap IDCR4 0x12
> ebc0_bear IDCR4 0x20
> ebc0_besr IDCR4 0x21
> ebc0_cfg IDCR4 0x23
> ebc0_cid IDCR4 0x24
> ;
>
>
>
> Jeff Stevens wrote:
> > Does anyone know where I can get a BDI2000 config
> file
> > for AMCC's Luan eval board, and a BDI2000 reg file
> for
> > the 440SP?
> >
> > Thanks,
> > Jeff
> > jsteve17 at yahoo.com
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> >
> >
>
-------------------------------------------------------
> > This SF.Net email is sponsored by xPML, a
> groundbreaking scripting language
> > that extends applications into web and mobile
> media. Attend the live webcast
> > and join the prime developer group breaking into
> this new coding territory!
> >
>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> > _______________________________________________
> > U-Boot-Users mailing list
> > U-Boot-Users at lists.sourceforge.net
> >
>
https://lists.sourceforge.net/lists/listinfo/u-boot-users
> >
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
http://mail.yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
^ permalink raw reply [flat|nested] 4+ messages in thread