From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marco Cavallini <arm.linux@koansoftware.com>
Date: Wed, 15 Mar 2006 11:45:42 +0100
Subject: [U-Boot-Users] Set new board
In-Reply-To: <e24335010603150113h6ae5d202k@mail.gmail.com>
References: <e24335010603150113h6ae5d202k@mail.gmail.com>
Message-ID: <4417F056.9060804@koansoftware.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

MARCO LUFFARELLI ha scritto:
> I have make a new board with samsung s3c2410a processor, ethernet controllor
> cs8900a-cq3, 2 banks of samsung ram k4s283233f-hn75 and 1 bank of flash
> memory k9f2808uoc-ycbo samsung. total size of ram is 256MB organized in two
> bank (128MBx2). Total flash is 128MB. I need a help to configure the u-boot.
> How and what i can cange in the original file of u-boot version 1.1.2 to
> setting flash memory and 2 banks of ram?
> 
> tahnks .
> 

Flash and memory informations and related drivers are usually located 
into trhe proper board directory.
BTW I suggest you to patch against the latest 1.1.4 version in order to 
avoid to waste your effort with an old version.

Ciao
-- 
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org