[U-Boot] Xilinx Zed Board resets with Master

[Tim Sander <tim@krieglstein.org>]

Hi

As i have seen that the Xilinx support has entered master i just tried to boot 
it on a Xilinx Zynx Zedboard Rev. D. The build works with the xilinx git tree 
so i am pretty confident that its not some issues with bootgen or the embedded 
fpga image.

The board loads the fpga which can be seen by the blue "done" led of the 
ZedBoard. But then the LED turns off and about after a second or so it just 
lights up shortly again to turn off again. So it seems as if the board is 
somehow caught in a reboot loop. Any ideas what might be wrong?

I am building with:
export PATH=~/xilinx/SDK/2013.3/gnu/arm/lin/bin:$PATH
export CROSS_COMPILE=arm-xilinx-linux-gnueabi-
make clean
make distclean
make zynq_zed_config
make

The BOOT.BIN is build
xilinx/SDK/2013.3/bin/lin64/bootgen -image u-boot.bif -w on -o BOOT.BIN

And u-boot.bif looks like that:
the_ROM_image:
{
 [bootloader]zynq_fsbl_0.elf
system.bit
u-boot.elf
}

Best regards
Tim