public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [heur] Re:  PPC405EP ethernet problems
Date: Fri, 16 Jun 2006 17:26:18 +0200	[thread overview]
Message-ID: <4492CD9A.50005@esd-electronics.com> (raw)
In-Reply-To: <61C61BB7D4828E4EB72B065C85E3D8A628A48B@szexchange.schmid-telecom.com>

Hi,

is it possible that you use miiphy_read/write() somewhere in your board 
specific code? If so, in which function? Which board is it?

Can you post the code from your board setup that does any network 
related stuff?

Matthias

Stalder, Reto schrieb:
> Hi Matthias
> 
> Thank you for your quick response! I've tried out your suggestion.
> Unfortunately U-Boot stops while booting, without reaching the command
> prompt. The output is:
> 
> ...
> U-Boot 1.1.4 (Jun 16 2006 - 16:45:43)
> 
> CPU:   AMCC PowerPC 405EP Rev. B at 266.666 MHz (PLB=133, OPB=66, EBC=33
> MHz)
>        I2C boot EEPROM disabled
>        16 kB I-Cache 16 kB D-Cache
> DRAM:   8 MB
> FLASH: 16 MB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   
> ...
> 
> Enabled debug outputs (with defined DEBUG and ET_DEBUG constants) do not
> tell me anything more. What else could I try?
> 
> Best regards,
> Reto

  reply	other threads:[~2006-06-16 15:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-16 14:58 [U-Boot-Users] [heur] Re: PPC405EP ethernet problems Stalder, Reto
2006-06-16 15:26 ` Matthias Fuchs [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-06-19  7:57 Stalder, Reto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4492CD9A.50005@esd-electronics.com \
    --to=matthias.fuchs@esd-electronics.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox