From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Cavallini Date: Wed, 19 Jul 2006 12:26:14 +0200 Subject: [U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK In-Reply-To: References: Message-ID: <44BE08C6.5080404@koansoftware.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Erdmann, Thomas ha scritto: > Hello Marco, > thanks for your Tips - i searched since Monday for any hints !!! > It seems that Atmel has done some work on u-boot but doesn't tell this their > Customers ;-) > Your "Howto replace u-boot..." is half the solution of my Problem. > I have new Boards without any SW, the Flash is empty. > So i want to Xmodem loader.bin and with this the u-boot and with this anything what does a boot out of Flash to u-boot :-) > > Can you tell me, what to do to reach this ? > Thomas, if you have to program NOR parallel Flash you simply need to Remove the resistor R159 on the AT91RM9200-DK to start the processor from its internal boot ROM. Read the Datasheet In any case for your (and other) reference I added some links here http://www.koansoftware.com/en/art.php?art=90 Ciao -- Marco Cavallini Koan s.a.s. - Bergamo - ITALIA Embedded and Real-Time Software Engineering Tel. +39-(0)35-255.235 - Fax +39-178-223.9748 www.KoanSoftware.com | www.KaeilOS.com