From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Cavallini Date: Wed, 19 Jul 2006 15:05:50 +0200 Subject: [U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK In-Reply-To: References: Message-ID: <44BE2E2E.5050703@koansoftware.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Erdmann, Thomas ha scritto: > > Hello Wolfgang, > that Information isn't new so i forgot to answer for this. > If i set a #define CONFIG_SKIP_LOWLEVEL_INIT in the include/configs/at91rm9200dk.h > ( and appending an #ifdef CONFIG_SKIP_LOWLEVEL_INIT around Function cpu_init_crit: in init.S to avoid an error message )the resulting u-boot.bin is a few Bytes shorter but it doesn't run after load by loader.bin, too. > So i thought there must be another Setting, > CONFIG_BOOTBINFUNC was another Tip in Mail List but doesn't help too. > I started a Request at Atmel, perhaps they will give a Patch or something else. > > THX for your Help > Thomas Actually you need some patches not yet applied if you play with CONFIG_SKIP_LOWLEVEL_INIT and AT91. Please see ML history. Ciao -- Marco Cavallini Koan s.a.s. - Bergamo - ITALIA Embedded and Real-Time Software Engineering Tel. +39-(0)35-255.235 - Fax +39-178-223.9748 www.KoanSoftware.com | www.KaeilOS.com