From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Hawkins <dwh@ovro.caltech.edu>
Date: Fri, 28 Jul 2006 11:26:42 -0700
Subject: [U-Boot-Users] Invalid MPC8349EMDS OR0 setting?
In-Reply-To: <995B09A8299C2C44B59866F6391D2635018C8D@zch01exm21.fsl.freescale.net>
References: <995B09A8299C2C44B59866F6391D2635018C8D@zch01exm21.fsl.freescale.net>
Message-ID: <44CA56E2.1010207@ovro.caltech.edu>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Dave,

> Please refer to the latest reference manual about the two bits. 
> The bit 17 and 18 should be XAM. See the section 10.3.1.2.1

Yikes, thats subtle. The OR tables for GPCM lists those bits
as reserved, and reset and U-Boot is using the GPCM to access
flash ... so I would have interpreted 'Figure 10-3 Option
Registers (ORn) in GPCM' to mean those bits were reserved.

Thanks for the heads-up.

> I don't recommend you put the 2.0 silicon to orginal MDS board directly.
> Please contact with Freescale FAE or sales to get more information about
> it.

Ok, I will thanks.

Dave