From: Justin Clacherty <justin@redfish-group.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Flash configuration
Date: Thu, 24 Aug 2006 19:49:38 +1000 [thread overview]
Message-ID: <44ED7632.7010700@redfish-group.com> (raw)
Hi,
I've ported u-boot to my PXA270 board and have it working as a network
boot loader. I'm now trying to get flash programming working so I can
flash the kernel and root file system. Our board has two Intel 512Mib
P30 flashes on it configured as 32-bit memory. The 512Mib parts are
actually two 256Mib parts on the same die so u-boot should see two banks
of 32-bit memory with two flash devices in each bank.
After booting flinfo shows that u-boot has found four devices but the
addresses seem to be wrong. It has
bank 1 0x00000000 - 0x03ffffff
bank 2 0x04000000 - 0x07ffffff
bank3 0x00000000 - 0x03ffffff
bank 4 0x00000000 - 0x03ffffff.
Any ideas where I might have gone wrong? The relevant portions of my
board header file are below.
Regards,
Justin.
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
#define CFG_FLASH_BASE_1 PHYS_FLASH_1
#define CFG_FLASH_BASE_2 PHYS_FLASH_2
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE_1, CFG_FLASH_BASE_2 }
#define CFG_MONITOR_BASE 0
#define CFG_MONITOR_LEN 0x20000
#define CFG_MAX_FLASH_BANKS 4 /* max number of memory
banks */
#define CFG_MAX_FLASH_SECT (4 + 255) /* max number of sectors on
one chip */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
/* write flash less slowly */
#define CFG_FLASH_USE_BUFFER_WRITE 1
/* Flash environment locations */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_FLASH_BASE_1 + CFG_MONITOR_LEN)
/* Addr of Environment Sector */
#define CFG_ENV_SIZE 0x10000 /* Total Size of
Environment */
#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment
Sector */
next reply other threads:[~2006-08-24 9:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-24 9:49 Justin Clacherty [this message]
2006-08-24 10:01 ` [U-Boot-Users] Flash configuration Wolfgang Denk
2006-08-24 10:18 ` Justin Clacherty
2006-08-24 10:30 ` Wolfgang Denk
2006-08-24 11:26 ` Justin Clacherty
2006-08-24 12:13 ` Wolfgang Denk
2006-08-24 12:24 ` [U-Boot-Users] about the function "pci_write_config_dwor d" Denny
2006-08-24 15:18 ` Wolfgang Denk
2006-08-24 12:31 ` [U-Boot-Users] Flash configuration Jerry Van Baren
2006-08-25 14:13 ` Justin Clacherty
-- strict thread matches above, loose matches on Subject: below --
2005-10-13 15:27 Jose França (Ext_GTBC)
2005-10-13 15:43 ` Alex Zeffertt
2005-10-13 15:53 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44ED7632.7010700@redfish-group.com \
--to=justin@redfish-group.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox