* [U-Boot-Users] Large Jffs2 filesystem
@ 2006-09-28 18:37 Bill Sehnert
0 siblings, 0 replies; 2+ messages in thread
From: Bill Sehnert @ 2006-09-28 18:37 UTC (permalink / raw)
To: u-boot
Hello,
I have a system with a jffs2 filesystem that spans over multiple flash
parts. I want
to use u-boot to boot the linux system where the kernel is in the jffs2
filesystem.
I can't seem to configure u-boot so the jffs2 filesystem is in multiple
devices/partitions.
It seems that a partition must fit within a device(part).
Is there a way to configure the system so "ls" will see the entire jffs2
filesystem?
Thanks
bill.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Large Jffs2 filesystem
@ 2006-09-29 15:52 Joakim Tjernlund
0 siblings, 0 replies; 2+ messages in thread
From: Joakim Tjernlund @ 2006-09-29 15:52 UTC (permalink / raw)
To: u-boot
> Hello,
>
> I have a system with a jffs2 filesystem that spans over
> multiple flash
> parts. I want
> to use u-boot to boot the linux system where the kernel is in
> the jffs2
> filesystem.
>
> I can't seem to configure u-boot so the jffs2 filesystem is
> in multiple
> devices/partitions.
> It seems that a partition must fit within a device(part).
Me too, if you find a way, please let me know.
Jocke
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-09-29 15:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-28 18:37 [U-Boot-Users] Large Jffs2 filesystem Bill Sehnert
-- strict thread matches above, loose matches on Subject: below --
2006-09-29 15:52 Joakim Tjernlund
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox