From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joe Steeve Date: Mon, 13 Nov 2006 13:49:50 +0530 Subject: [U-Boot-Users] Compilation failure (gcc options..) In-Reply-To: <03C644EDACDDFE44A97012968D879944123C243A@ot-mail01.de.bosch.com> References: <03C644EDACDDFE44A97012968D879944123C243A@ot-mail01.de.bosch.com> Message-ID: <45582AA6.7040401@sliceware.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Jonas Mark (ST-FIR/ENG1) wrote: > Googling for this gives you for example this very helpful link: > http://gcc.gnu.org/onlinedocs/gcc-4.1.1/gcc/Preprocessor-Options.html#Pr > eprocessor-Options Thanks., I figured that :) > Hint on googling: When looking for keywords that start with a dash > put them in quotes or else Google will only return pages that do > *not* contain these keywords. Additionally, limiting Google to a > specific site helps as well. So your Google search could have been > > gcc "-mq" site:gcc.gnu.org Thanks again., I knew that the '-' was screwing it up., but did not know quoting it would help. :) > So most likely your GCC tool chain is broken or too old. I am not an > ARM expert but the ELDK 4.0 from Denx > (http://www.denx.de/en/News/PressReleaseELDK40) is most likely a good > choice. Yeah., the version of gcc i use is 2.95.3. It does not have the -MT/-MQ options in it. I'll try the ELDK compilers :) -- Joe Steeve Sliceware Private Limited -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: OpenPGP digital signature Url : http://lists.denx.de/pipermail/u-boot/attachments/20061113/c175f434/attachment.pgp