[U-Boot-Users] environment problem with new board

[Joe Steeve <joe@sliceware.com>]

I'm porting u-boot to a Sigma Designs em8620L based board. The em8620L
is an SOC with an ARMv4t core (pT-110).

I managed to get u-boot to the prompt :) However., a 'printenv' dumps
garbage on the console. I've been slightly clueless as to where to look
in the sources. Any pointers would be of help. I'm defining
'CFG_ENV_IS_NOWHERE'.

I also have defined CONFIG_COMMANDS to CFG_CMD_ALL., however I see only
the following commands when i issue a 'help' on the prompt.,

?       - alias for 'help'
bootm   - boot application image from memory
go      - start application at address 'addr'
help    - print online help
printenv- print environment variables
reset   - Perform RESET of the CPU
saveenv - save environment variables to persistent storage
setenv  - set environment variables
version - print monitor version

Is this right??

-- 
Joe Steeve
Sliceware Private Limited

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: OpenPGP digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061122/842a5bbe/attachment.pgp