From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joe Steeve Date: Wed, 22 Nov 2006 09:31:10 +0530 Subject: [U-Boot-Users] environment problem with new board Message-ID: <4563CB86.1060006@sliceware.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I'm porting u-boot to a Sigma Designs em8620L based board. The em8620L is an SOC with an ARMv4t core (pT-110). I managed to get u-boot to the prompt :) However., a 'printenv' dumps garbage on the console. I've been slightly clueless as to where to look in the sources. Any pointers would be of help. I'm defining 'CFG_ENV_IS_NOWHERE'. I also have defined CONFIG_COMMANDS to CFG_CMD_ALL., however I see only the following commands when i issue a 'help' on the prompt., ? - alias for 'help' bootm - boot application image from memory go - start application at address 'addr' help - print online help printenv- print environment variables reset - Perform RESET of the CPU saveenv - save environment variables to persistent storage setenv - set environment variables version - print monitor version Is this right?? -- Joe Steeve Sliceware Private Limited -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: OpenPGP digital signature Url : http://lists.denx.de/pipermail/u-boot/attachments/20061122/842a5bbe/attachment.pgp