[U-Boot-Users] U-boot-1.1.4 on MPC8540

[revathy <j.revathy@gdatech.co.in>]

> Hi all,
>
> I'm booting a newly compiled u-boot-1.1.4 image on my MPC8540,
> and it doesn't work. It hangs after this..
> **************************************
> U-Boot 1.1.4 (Nov 23 2006 - 10:34:07)
>
> Freescale PowerPC
>    Core: E500, Version: 2.0, (0x80200020)
> CPU:   8540, Version: 2.0, (0x80300020)
> Clock Configuration:
>       CPU: 825 MHz, CCB: 330 MHz,
>       DDR: 165 MHz, LBC:  82 MHz
> L1:    D-cache 32 kB enabled
>       I-cache 32 kB enabled
>
>        CPU: 825 MHz
>        CCB: 330 MHz
>        DDR: 165 MHz
>        LBC: 82 MHz
> L1 D-cache 32KB, L1 I-cache 32KB enabled.
> I2C:   ready
> DRAM:  256 MB
> PCIG8400 in PCI Host Mode.
> PCIG8400 not PCI Arbiter.
> ********************************************
> I've carefully copied every setup from the u-boot-1.1.2 image which 
> I've made.
> Now, how do I debug this.

On debugging ,  " In relocating the command table",  *for* loop is going 
on infinite loop in lib/ppc/board.c.
       Can anyone help in this.

>
> Thanks in advance.
> Revathy
>