From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tolunay Orkun <listmember@orkun.us>
Date: Mon, 27 Nov 2006 11:40:50 -0600
Subject: [U-Boot-Users] U-boot-1.1.4 on MPC8540
In-Reply-To: <456AC8A6.5080602@gdatech.co.in>
References: <20061123192744.13AAE3535D2@atlas.denx.de>
	<456AC8A6.5080602@gdatech.co.in>
Message-ID: <456B2322.40203@orkun.us>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

revathy wrote:
> Hi,
>       
> 
> I'm booting a newly compiled u-boot-1.1.4 image on my MPC8540,
> and it doesn't work. when i debugged i found in lib_ppc/board.c
> 
> 	for (cmdtp = &__u_boot_cmd_start; cmdtp !=  &__u_boot_cmd_end; cmdtp++)
> 
> &__u_boot_cmd_start=0fff3750
> 
> &__u_boot_cmd_end =0fff43b8
>  and cmdtp is encremanted as  0x18 each 
> times..but it is not matching with u_boot_cmd_end so loop goes on until 
> ffffffff and hangs..
> what could be the problem..
> can anyone plz help me to proceed..
> Thanks
> Revathy
> 

I think your loader script (.lds) is not up to date to work with your 
toolchain (ld version 2.16 or later). See the following commit.

http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=807d5d7319330e336ab34a5623c5e0d73b87d540

I had similar issue when I updated the toolchain and tried to compile 
1.3 based board lds script. Obviously working with latest U-Boot does 
not help if your board was not in public git repository when this patch 
got in.

Tolunay