From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ulf Samuelsson <ulf@atmel.com>
Date: Mon, 04 Dec 2006 22:17:13 +0100
Subject: [U-Boot-Users] MMC/SD support for AT91SAM9261EK-board
In-Reply-To: <1defaf580612030716q59bc29abq94f679d7f7fbbb88@mail.gmail.com>
References: <1164995065.3432.25.camel@i2se-leipzig-7-x.i2se.local>
	<1defaf580612030716q59bc29abq94f679d7f7fbbb88@mail.gmail.com>
Message-ID: <45749059.7000000@atmel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Haavard Skinnemoen skrev:
> On 12/1/06, Lutz Ballaschke <lutz.ballaschke@i2se.com> wrote:
>   
>> Hi there,
>>
>> has anyone tried this before?
>> I just know this board being supported by the atmel-patch for
>> u-boot-1.1.4 and there is no MMC/SD support included.
>> Might it be possible to adapt any existing source code?
>> (possibly the AT91RM9200dk sources)?
>>     
>
> I've got one for AT32AP7000, which uses basically the same MMC
> controller. I'll see if I can get it cleaned up for submission in a
> couple of days, although I've got some quite intrusive changes for
> AVR32 waiting for approval at the moment...
>
> If you're using 1.1.4, you could of course try to pull the driver out
> of the patch at
> http://avr32linux.org/twiki/pub/Main/UbootPatches/u-boot-1.1.4-avr32-20060621.patch...
>
> H?vard
>   

There is SD/MMC support in one of the AT91 Forums at www.at91.com
Either Linux or ARM9.
This was ported to U-.Boot 1.1.3 but I assume it is not a big deal
to port it to 1.1.4 or later.
/Ulf Samuelsson