[U-Boot-Users] PPC 83xx + QE support

[U-Boot-Users] PPC 83xx + QE support

[David Saada]

Thanks guys. Didn't find it under the latest (1.1.6) distribution. Was
it added at a later stage?
Regards,
David.



-----Original Message-----
From: Jerry Van Baren [mailto:gerald.vanbaren at smiths-aerospace.com] 
Sent: Wednesday, January 17, 2007 5:36 PM
To: David Saada
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] PPC 83xx + QE support

David Saada wrote:
> Hello,
> Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> based boards? Relevant boards can be Freescale's 8360 or 8323 based
> ones.
> Thanks.
> David. 

Hi David,

The Freescale MPC8360eMDS comes with u-boot already installed, so that 
would be a "yes."
<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8360E
>
<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8360E
MDS&parentCode=MPC8360E&nodeId=0162468rH3bTdGJk191439>

Best Regards,
gvb

-----Original Message-----
From: Timur Tabi [mailto:timur at freescale.com] 
Sent: Wednesday, January 17, 2007 5:30 PM
To: David Saada
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] PPC 83xx + QE support

David Saada wrote:
> Hello,
> Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> based boards? Relevant boards can be Freescale's 8360 or 8323 based
> ones.

The MPC8360EMDS is supported already.

[U-Boot-Users] PPC 83xx + QE support

[Timur Tabi]

David Saada wrote:
> Thanks guys. Didn't find it under the latest (1.1.6) distribution. Was
> it added at a later stage?

Yes.  1.1.6 came out on Nov 2, and 8360 support was added on Nov 4.

Keep in mind that the latest version of U-Boot is 1.2, which includes 
8360 support and was released on Jan 6.

[U-Boot-Users] PPC 83xx + QE support

[David Saada]

Thanks.
David.

-----Original Message-----
From: wd@denx.de [mailto:wd at denx.de] 
Sent: Wednesday, January 17, 2007 11:01 PM
To: David Saada
Cc: Timur Tabi; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] PPC 83xx + QE support 

In message <B27D27F93BC429468DBC3B0DA043AA44033871@ilptex01.ecitele.com>
you wrote:
> Thanks again. Please note that the SourceForge download page still
> states 1.1.6 as the latest version.
> http://sourceforge.net/project/showfiles.php?group_id=65938
> Should I use a different download location?

Yes. We don't use the SourceForge CVS repo any more. See
http://www.denx.de/en/Software/GIT 


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A failure will not appear until a unit has passed final inspection.

[U-Boot-Users] PPC 83xx + QE support

[Joakim Tjernlund]

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Timur Tabi
> Sent: 17 January 2007 16:30
> To: David Saada
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] PPC 83xx + QE support
> 
> David Saada wrote:
> > Hello,
> > Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> > based boards? Relevant boards can be Freescale's 8360 or 8323 based
> > ones.
> 
> The MPC8360EMDS is supported already.

What happened to the MPC8323EMDS port at opensource.freescale.com?

[U-Boot-Users] PPC 83xx + QE support

[David Saada]

Thanks again. Please note that the SourceForge download page still
states 1.1.6 as the latest version.
http://sourceforge.net/project/showfiles.php?group_id=65938
Should I use a different download location?
Regards,
David.

David Saada wrote:
> Thanks guys. Didn't find it under the latest (1.1.6) distribution. Was
> it added at a later stage?

Yes.  1.1.6 came out on Nov 2, and 8360 support was added on Nov 4.

Keep in mind that the latest version of U-Boot is 1.2, which includes 
8360 support and was released on Jan 6.

[U-Boot-Users] PPC 83xx + QE support

[Wolfgang Denk]

In message <B27D27F93BC429468DBC3B0DA043AA44033871@ilptex01.ecitele.com> you wrote:
> Thanks again. Please note that the SourceForge download page still
> states 1.1.6 as the latest version.
> http://sourceforge.net/project/showfiles.php?group_id=65938
> Should I use a different download location?

Yes. We don't use the SourceForge CVS repo any more. See
http://www.denx.de/en/Software/GIT 


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A failure will not appear until a unit has passed final inspection.

[U-Boot-Users] PPC 83xx + QE support

[David Saada]

Hello,
Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
based boards? Relevant boards can be Freescale's 8360 or 8323 based
ones.
Thanks.
David. 

[U-Boot-Users] PPC 83xx + QE support

[Timur Tabi]

David Saada wrote:
> Hello,
> Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> based boards? Relevant boards can be Freescale's 8360 or 8323 based
> ones.

The MPC8360EMDS is supported already.

[U-Boot-Users] PPC 83xx + QE support

[Jerry Van Baren]

David Saada wrote:
> Hello,
> Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> based boards? Relevant boards can be Freescale's 8360 or 8323 based
> ones.
> Thanks.
> David. 

Hi David,

The Freescale MPC8360eMDS comes with u-boot already installed, so that 
would be a "yes."
<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8360E>
<http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8360EMDS&parentCode=MPC8360E&nodeId=0162468rH3bTdGJk191439>

Best Regards,
gvb

[U-Boot-Users] PPC 83xx + QE support

[Timur Tabi]

David Saada wrote:
> Hello,
> Are there plans for U-boot to support any PPC 83xx+QE (Quick Engine)
> based boards? Relevant boards can be Freescale's 8360 or 8323 based
> ones.

Note that the current U-Boot code in denx.de does not set the QE frequencies in the OF 
tree.  I have plans to fix that.

-- 
Timur Tabi
Linux Kernel Developer @ Freescale