From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Samuelsson Date: Tue, 30 Jan 2007 00:08:33 +0100 Subject: [U-Boot-Users] Atmel DataFlash hooks. In-Reply-To: <20070129132910.020C2353AC5@atlas.denx.de> References: <20070129132910.020C2353AC5@atlas.denx.de> Message-ID: <45BE7E71.5010703@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > If it can be decided that the only devices that will be supported by the > memory commands in cmd_mem.c are those devices that can be read directly > as ram without a read routine, I think that would help clarify the > intent of the commands. > Why limit to "read". Why not say that any memory which can be read or *written* without a driver will be supported by the cmd_mem.c ? -- Best Regards, Ulf Samuelsson ulf at atmel.com Atmel Nordic AB Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29 GSM +46 (706) 22 44 57 Technical support when I am not available: AT90 AVR Applications Group: mailto:avr at atmel.com AT91 ARM Applications Group: mailto:at91support at atmel.com links: www.avrfreaks.net; www.at91.com; avr32linux.org -------------- next part -------------- A non-text attachment was scrubbed... Name: ulf.vcf Type: text/x-vcard Size: 313 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20070130/94500636/attachment.vcf