[U-Boot-Users] MPC8360 Rev 2 patch?

Steven Hein
2007-02-09T21:44:15Z

Timur Tabi wrote:

> Kim Phillips wrote:
>
>>> One question about the 8360 version. When I compile it straight up
>>> for the MPC8360EMDS_HOST_66 configuration, I never see any output
>>> at the startup of U-boot. But if I comment out the open firmware
>>> defines in the include/configs/MPC8360EMDS.h config file, then all
>>> works.
>>> Why doesn't this work for me straight up on the board it was
>>> compiled for?
>>> (This has been true for all U-boot versions I've tried for the 8360).
>>>
>> that's odd - MPC8360EMDS_HOST_66 works fine here and there's nothing
>> obvious I can see in the code that would warrant that sort of
>> behaviour. Can you provide details?
>
>
> I think the problem is in his device tree. Either it's missing or
> incorrect.
>
>
I'm sure that you are right, Timur. Every version of U-boot I've
tried to use,
all the way back to 1.3.x, for the 8360 as well as the 8349EMDS, has had
the same problem. And as soon as I comment out the OF stuff in the config
file, all is well. (I haven't looked into it in detail, so I can't
provide a lot
of info at the moment. ......and my new custom MPC8358 board arrived
just about an your ago! Friday afternoon, right on time! ;-) ).

At this point, I know *nothing* about device trees or OF......
Is this something that lives outside of u-boot?

I guess someone probably needs to point me to some "device trees
for dummies" info........

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Steve Hein (ssh at sgi.com) Engineering Diagnostics/Software
Silicon Graphics, Inc.
1168 Industrial Blvd. Phone: (715) 726-8410
Chippewa Falls, WI 54729 Fax: (715) 726-6715
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~