[U-Boot-Users] MPC8360 Rev 2 patch?

[Steven Hein <ssh@sgi.com>]

Kim Phillips wrote:

>On Thu, 08 Feb 2007 10:28:09 -0600
>Steven Hein <ssh@sgi.com> wrote:
>
>  
>
>>I just received word that my board will be in my hands
>>at tomorrow (Friday) morning.    Will the 8360 rev.2 support
>>be available?
>>    
>>
>
>it's already in the 'mpc83xx' branch on the opensource.freescale.com u-boot-83xx.git tree.  DDR2 seems to be working fine.
>
>I hesitated to broadcast this info since I haven't finished testing it on our boards, plus the patches haven't been posted here yet.
>
>For future reference, the stuff considered stable on mpc83xx will be pulled into the 'upstream' branch.  Once Rev.2 support tests ok, I'll ask WD to pull from the 'upstream' branch.
>
>Kim
>  
>
Thanks Kim!    After a little bit of "git for dummies", I figured out how
to grab the mpc83xx branch.     But before your mail, I was just looking
in WD's git tree for the changes--I didn't know that freescale had its
own git trees for u-boot.

One question about the 8360 version.   When I compile it straight up
for the MPC8360EMDS_HOST_66 configuration, I never see any output
at the startup of U-boot.   But if I comment out the open firmware
defines in the include/configs/MPC8360EMDS.h config file, then all works.
Why doesn't this work for me straight up on the board it was compiled for?
(This has been true for all U-boot versions I've tried for the 8360).

Thanks,
Steve

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Steve Hein (ssh at sgi.com)              Engineering Diagnostics/Software
Silicon Graphics, Inc.                          
1168 Industrial Blvd.                 Phone: (715) 726-8410
Chippewa Falls, WI 54729              Fax:   (715) 726-6715
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~