From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steven Hein Date: Thu, 08 Feb 2007 16:50:50 -0600 Subject: [U-Boot-Users] MPC8360 Rev 2 patch? In-Reply-To: <20070208105947.7a7655f0.kim.phillips@freescale.com> References: <45C7BA89.8050602@sgi.com> <20070205172034.68846c61.kim.phillips@freescale.com> <45CB4F99.6030107@sgi.com> <20070208105947.7a7655f0.kim.phillips@freescale.com> Message-ID: <45CBA94A.3050404@sgi.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Kim Phillips wrote: >On Thu, 08 Feb 2007 10:28:09 -0600 >Steven Hein wrote: > > > >>I just received word that my board will be in my hands >>at tomorrow (Friday) morning. Will the 8360 rev.2 support >>be available? >> >> > >it's already in the 'mpc83xx' branch on the opensource.freescale.com u-boot-83xx.git tree. DDR2 seems to be working fine. > >I hesitated to broadcast this info since I haven't finished testing it on our boards, plus the patches haven't been posted here yet. > >For future reference, the stuff considered stable on mpc83xx will be pulled into the 'upstream' branch. Once Rev.2 support tests ok, I'll ask WD to pull from the 'upstream' branch. > >Kim > > Thanks Kim! After a little bit of "git for dummies", I figured out how to grab the mpc83xx branch. But before your mail, I was just looking in WD's git tree for the changes--I didn't know that freescale had its own git trees for u-boot. One question about the 8360 version. When I compile it straight up for the MPC8360EMDS_HOST_66 configuration, I never see any output at the startup of U-boot. But if I comment out the open firmware defines in the include/configs/MPC8360EMDS.h config file, then all works. Why doesn't this work for me straight up on the board it was compiled for? (This has been true for all U-boot versions I've tried for the 8360). Thanks, Steve -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Steve Hein (ssh at sgi.com) Engineering Diagnostics/Software Silicon Graphics, Inc. 1168 Industrial Blvd. Phone: (715) 726-8410 Chippewa Falls, WI 54729 Fax: (715) 726-6715 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~