From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steven Hein Date: Fri, 09 Feb 2007 16:06:02 -0600 Subject: [U-Boot-Users] BDI2000 config for MPC8360rev2 with DDR2 memory? Message-ID: <45CCF04A.3080800@sgi.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all-- I just received a new custom board with an MPC8360r2 with 128MB DDR2 memory on the board. My 8360EMDS board has a rev 1.2 part with DDR, so I know I need a different set of init registers in my BDI2000 config. If anyone has a similar config and could send me a BDI2000 config file for it, that would be AWESOME! In the mean time, I'm trying to flash u-boot directly into my flash part using the BDI2000 and let it initialize my memory for me. But this is all fairly uncharted territory for me, so a BDI config would be helpful. Thanks! Steve -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Steve Hein (ssh at sgi.com) Engineering Diagnostics/Software Silicon Graphics, Inc. 1168 Industrial Blvd. Phone: (715) 726-8410 Chippewa Falls, WI 54729 Fax: (715) 726-6715 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~