[U-Boot-Users] [PATCH] Fix initrd length miscalculation in bootm command

[Timur Tabi <timur@freescale.com>]

Kumar Gala wrote:

>> I've never heard of multi image before.  How do I make one?  The 
>> README doesn't explain it.
> 
> mkimage  -A ppc -O Linux -T multi -C gzip -n 'Linux Multiboot-Image' -e 
> 0 -a 0 -d vmlinux.gz:rootfs.ext2.gz:oftree.dtb  kern+fs+dtb.bin

I need some more help getting the multi-image to work.  I have the following files:

vmlinux.bin.gz (built myself)
rootfs.ext2.gz.uboot (from the BSP, because I don't know how to build a root 
file system.  I don't know what the ".uboot" is for.)
mpc8349emitx.dtb (built myself)

I create the multi image per you instructions, tftp them to $loadaddr (200000), 
and do "bootm $loadaddr".  I get this output:

bootm $loadaddr
## Booting image at 00200000 ...
    Image Name:   Linux Multiboot-Image
    Created:      2007-02-19  23:46:03 UTC
    Image Type:   PowerPC Linux Multi-File Image (gzip compressed)
    Data Size:    20407814 Bytes = 19.5 MB
    Load Address: 00000000
    Entry Point:  00000000
    Contents:
    Image 0:  1416615 Bytes =  1.4 MB
    Image 1: 18987128 Bytes = 18.1 MB
    Image 2:     4054 Bytes =  4 kB
    Verifying Checksum ... OK
    Uncompressing Multi-File Image ... OK


U-Boot 1.2.0-g2e892316-dirty (Feb  9 2007 - 15:56:37) MPC83XX


So the image appears to be okay, but it doesn't boot at all.  Is there something 
obvious I'm doing wrong, or will I have to debug this?

-- 
Timur Tabi
Linux Kernel Developer @ Freescale