From mboxrd@z Thu Jan 1 00:00:00 1970 From: pharaoh Date: Thu, 15 Mar 2007 22:34:41 +0530 Subject: [U-Boot-Users] Hiiii....Everyone In-Reply-To: <3d261bac0703152230p5329b2f2g1ed2ac8443d163f9@mail.gmail.com> References: <3d261bac0703152230p5329b2f2g1ed2ac8443d163f9@mail.gmail.com> Message-ID: <45F97CA9.5040705@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de kushal ahuja wrote: > Dear All, > I have a new board with me which has nothing onto it.I also have > u-boot image with me, but when i am downloading the image by using > hyperterminal (kermit) its not loading into my board. What to follow > to bring up my board plz. suggest. > > Thanks in advance > > -- > Best Regards, > Kushal Ahuja > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ------------------------------------------------------------------------ > > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > Hello From a recent conversation on the same list: No, kermit cannot download to flash, it's only talking to the serial line. If you had a working U-Boot running on your target, you could use that, but so you have a chicken & egg problem... > > On my new board which doesnt have any boot loader, can I use kermit to > > download u-boot.bin to RAM and check whether is working from there? > No, you cannot. See the FAQ: http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM