From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
Date: Mon, 19 Mar 2007 09:47:46 -0400
Subject: [U-Boot-Users] u-boot 1.1.4 compiled by eldk 4.1 for mpc82xx
 crashed
In-Reply-To: <45FE7BD7.2000506@centecnetworks.com>
References: <45FE7BD7.2000506@centecnetworks.com>
Message-ID: <45FE9482.8030008@smiths-aerospace.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Miao Qingjun wrote:
> Hi,
> 
> I encountered a big problem that u-boot 1.1.4 compiled by eldk 4.1 for
> mpc82xx crashed.
> 
> But if I build it using gcc-3.4.6 based cross tools, u-boot on my board
> boots correctly.
> 
> u-boot built by eldk 4.1 (gcc-4.0) failed, nothing occures on serial
> port.
> 
> Somebody sufered the same problem?

This is often a missing "volatile" qualifier on shared variable
(particularly hardware registers) references.  Newer compiler versions
optimize more aggressively, making missing "volatile"s visible.

If you use -O0 (no optimization) does it fix the problem?  If it does,
it most likely is an optimization/volatile issue.  The hard part is to
figure out where.  Device handling and board-specific code is the place
to start.

Best regards,
gvb