From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Looijmans Date: Thu, 17 Nov 2016 13:34:55 +0100 Subject: [U-Boot] Dynamically determine RAM size and pass it to kernel Message-ID: <45fe9a10-e620-0ae2-0a3f-b8fd182b00a0@topic.nl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de ?We have some Zynq based boards still in the field that have only 512MB RAM instead of 1GB. The memory chips are compatible and use the same settings apart from that one extra address bit. So what works is just configure the DDR controller for 1GB and then check if writing some data "wraps" back, this is my "spike" code in the RAM init code for that: + u32 *ptr_1 = (u32*)0x10000; + u32 *ptr_2 = (u32*)((gd->ram_size >> 1) + 0x10000); + + puts("RAM test"); + *ptr_1 = 0x12345678; + if (*ptr_2 == *ptr_1) { + *ptr_1 = 0x87654321; + if (*ptr_2 == *ptr_1) { + puts(" [HALF]"); + gd->ram_size >>= 1; + } + } This works well, and reliably detects that the board only has half the amount of RAM, and corrects the ram_size variable. The problem I'm seeing now is that this new ram_size does not get passed to the kernel. Apparently in modern versions of u-boot I need to somehow patch the "live" devicetree blob as well? How does that work? Kind regards, Mike Looijmans System Expert TOPIC Products Materiaalweg 4, NL-5681 RJ Best Postbus 440, NL-5680 AK Best Telefoon: +31 (0) 499 33 69 79 E-mail: mike.looijmans at topicproducts.com Website: www.topicproducts.com Please consider the environment before printing this e-mail