From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bora Sahin Date: Wed, 6 Apr 2005 11:59:35 +0300 Subject: [U-Boot-Users] SM712 + U-Boot In-Reply-To: <42539789.5020001@staubli.com> References: <799428467.20050404205759@ttnet.net.tr><42539789.5020001@staubli.com> Message-ID: <462440158.20050406115935@ttnet.net.tr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, Pierre> I don't think that your card has a problem, I think it isn't configured Pierre> properly. Pierre> The LynxEM4+ Rev. BA has an 32 bits internal memory bus, the Rev. AA has a Pierre> 64 bits internal memory bus. Pierre> For the Rev BA, you need to switch ON the SW2:7 configuration switch. OK, but SW2 is related to SM722. The info on the backend of the card says SW2 -> SETTING FOR SM722... Still I tried your suggestion but there is no change as I expected! AFAIK, SW1 is nothing to do with a non-x86 system. It only boots a x86 system with determined resoluiton. That's it! Then OS changes it to what it wants! Also U-Boot sets its own resoultion thanks to compile time option or videomode env. variable... Pierre> I hope this helps. Thanks... -- Bora SAHIN Best Regards