* [U-Boot-Users] FDT for dynamic U-Boot configuration, startup
@ 2007-04-18 14:19 Wolfgang Grandegger
0 siblings, 0 replies; only message in thread
From: Wolfgang Grandegger @ 2007-04-18 14:19 UTC (permalink / raw)
To: u-boot
Hello,
as already discussed, FDT is a good choice for dynamically configuring
U-Boot. I actually plan to use FDT to configure some devices of a
MPC823, namely PCMCIA, the LCD controller, CAN and the RTC. Are there
already some ideas on the related startup sequence and how to re-use the
FDT when booting Linux. I guess there will be a FDT address defined in
the config file, e.g. CFG_FDT_BASE and the FDT will then be read and
checked somewhere early in the init sequence (in lib_ppc/board.c).
Thanks for any input.
Wolfgang.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-04-18 14:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-18 14:19 [U-Boot-Users] FDT for dynamic U-Boot configuration, startup Wolfgang Grandegger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox