[U-Boot-Users] Latest git not working for MPC8349EMDS

[David Hawkins <dwh@ovro.caltech.edu>]

> Thank all for your help with both platforms.  I found the value to boot!

Great!

> =>  md.b f8000000 20
> f8000000: 2f 0c 40 08 82 af 07 33 ff ff 43 12 ff ff ff 02
> /. at ....3..C.....
> f8000010: 22 07 05 19 24 ff ff ff ff ff ff ff ff ff ff ff
> "...$...........
> 
> The BMS was high before, so BCSR4 was 86, but for low boot it needs to
> be 82.
> 
> Oddly, changing the SW4.5 did not seem to change this(?)  I was able to
> write it from u-boot
> 
> => mw.b f8000004 82
> 
> And that did the trick!
> 
> Thank you all.  Any ideas why the switch is not working?  Currently I
> have to turn the board on, issue the above instruction to set low boot
> mode, then reset.  I should be able to power off/on and boot into low
> memory.  Any guesses what I am missing?

Sorry, no idea. Perhaps its a change between the E and the EA board.

Let us know if you figure it out :)

Dave