From: Tolunay Orkun <listmember@orkun.us>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Flash Erase/Write error in uboot
Date: Sat, 05 May 2007 00:26:57 -0500 [thread overview]
Message-ID: <463C15A1.1040808@orkun.us> (raw)
In-Reply-To: <f3cea0230705041946n11142005hb06819d136775e6e@mail.gmail.com>
Shiju Mathew wrote:
>
> On 5/3/07, *Tolunay Orkun* <listmember@orkun.us
> <mailto:listmember@orkun.us>> wrote:
> > Looks likes some other issue. On our Freescale imx31 ADS board
> we have
> > connected an extension board(RAM like device) to CS1 through the
> logical
> > analyser interface. The problem happens when I connect the extension
> > board(even without powering up the extension board). If I remove the
> > extension board the flash erase/writes are successfull.
> >
> > Thanks,
> > Shiju
> >
>
> Looks like an hardware/interfacing issue...
>
> I was debugging the problem further. We have two other bootloaders
> running on this board - redboot and Eboot. Both does not have this
Check how CS configuration etc. is correctly configured. If it is
working with the extension board not installed but not obviously you
have something wrong. It could be that your CS1 configuration is
incorrect. Possibilities are endless. But I do not see this as a flash
driver issue.
Tolunay
next prev parent reply other threads:[~2007-05-05 5:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 0:22 [U-Boot-Users] Flash Erase/Write error in uboot Shiju Mathew
2007-05-02 0:29 ` Wolfgang Denk
2007-05-02 16:24 ` Shiju Mathew
2007-05-02 23:10 ` Tolunay Orkun
2007-05-03 18:40 ` Shiju Mathew
2007-05-03 21:31 ` Tolunay Orkun
2007-05-05 2:46 ` Shiju Mathew
2007-05-05 5:18 ` Stefan Roese
2007-05-05 5:26 ` Tolunay Orkun [this message]
[not found] ` <c166aa9f0705050648p16b150c2sfb123108f7b0bce6@mail.gmail.com>
2007-05-08 18:36 ` Shiju Mathew
2007-05-08 18:59 ` Wolfgang Denk
2007-05-02 5:01 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=463C15A1.1040808@orkun.us \
--to=listmember@orkun.us \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox