From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Cavallini Date: Wed, 16 May 2007 17:51:36 +0200 Subject: [U-Boot-Users] u-boot for PXA270 In-Reply-To: References: Message-ID: <464B2888.3060004@koansoftware.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de ? ?? ha scritto: > Dear all, > I am John , and I met a problem about uboot migrate for PXA270. > My modification as following: > 1 add my board johnPxa in Makefile > johnPxa_config : unconfig > @$(MKCONFIG) $(@:_config=) arm pxa270 johnPxa > 2 add my board directory under board/ with board/lubbock > cp -a lubbock johnPxa > 3 add johnPxa.h under include/configs/ with lubbock.h > cp lubbock.h johnPxa.h > and modified it as my board's configuration. > 4 add pxa270 directory under cpu/ with cpu/pxa > cp -a pxa pxa270 > 5 modified config.mk under cpu/pxa270/ > PLATFORM_CPPFLAGS += -mapcs-32 -march=armv5 -mtune=xscale > 6 add my board information into mach-types.h > 7 modified start.S(cpu/pxa270) with blob's start.S and > xlli_LowLev_Init.s > ps: this blob could run on my board. > and I compiled with arm-linux-gcc 3.4.1 > At last the u-boot.bin couldn't run on my board. > Could you give me some help, thank you very much. > Best regards > John > > _________________________________________________________________ FYI Here you can find some already done work: http://www.koansoftware.com/en/prd_svil_projects.htm u-boot bootloader patch for Intel Mainstone (aka HCDDBBVA0) with ethernet support patched against 1.1.4 cvs Other resources are here: http://pxa-linux.sourceforge.net HTH -- Marco Cavallini Koan s.a.s. - Bergamo - Italia Embedded and Real-Time Software Engineering - Atmel Third Party Consultant - Intel PCA Developer Network Member - Ubuntu Marketplace Member Tel. +39-(0)35-255.235 - Fax +39-178-223.9748 http://www.KoanSoftware.com - http://www.KaeilOS.com