[U-Boot-Users] u-boot for PXA270

[Stefan Herbrechtsmeier <hbmeier@uni-paderborn.de>]

Marco Cavallini schrieb:
> ? ?? ha scritto:
>   
>> Dear all,
>>     I am John , and I met a problem about uboot migrate for PXA270.
>>     My modification as following:
>>       1  add my board johnPxa in Makefile
>>               johnPxa_config  :       unconfig
>>                  @$(MKCONFIG) $(@:_config=) arm pxa270 johnPxa
>>       2  add my board directory under board/  with board/lubbock
>>               cp -a lubbock johnPxa
>>       3  add johnPxa.h under include/configs/ with lubbock.h
>>               cp lubbock.h johnPxa.h
>>          and modified it as my board's configuration.
>>       4  add pxa270 directory under cpu/ with cpu/pxa
>>               cp -a pxa pxa270
>>       5 modified config.mk under cpu/pxa270/
>>               PLATFORM_CPPFLAGS += -mapcs-32 -march=armv5 -mtune=xscale
>>       6 add my board information into mach-types.h
>>       7 modified start.S(cpu/pxa270) with blob's start.S and
>> xlli_LowLev_Init.s
>>         ps: this blob could run on my board.
>>   and I compiled with arm-linux-gcc 3.4.1
>>    At last the u-boot.bin couldn't run on my board.
>>    Could you give me some help, thank you very much.
>> Best regards
>> John
>>
>> _________________________________________________________________
>>     
>
> FYI
>
> Here you can find some already done work:
> http://www.koansoftware.com/en/prd_svil_projects.htm
>
> u-boot bootloader patch for Intel Mainstone
> (aka HCDDBBVA0) with ethernet support
> patched against 1.1.4 cvs
>
> Other resources are here:
> http://pxa-linux.sourceforge.net
>
> HTH
>   
Hi,

U-Boot already support PXA270. I used ADSVIX  for my port.

regards
    Stefan