From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Herbrechtsmeier Date: Wed, 16 May 2007 18:18:30 +0200 Subject: [U-Boot-Users] u-boot for PXA270 In-Reply-To: <464B2888.3060004@koansoftware.com> References: <464B2888.3060004@koansoftware.com> Message-ID: <464B2ED6.3060607@uni-paderborn.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Marco Cavallini schrieb: > ? ?? ha scritto: > >> Dear all, >> I am John , and I met a problem about uboot migrate for PXA270. >> My modification as following: >> 1 add my board johnPxa in Makefile >> johnPxa_config : unconfig >> @$(MKCONFIG) $(@:_config=) arm pxa270 johnPxa >> 2 add my board directory under board/ with board/lubbock >> cp -a lubbock johnPxa >> 3 add johnPxa.h under include/configs/ with lubbock.h >> cp lubbock.h johnPxa.h >> and modified it as my board's configuration. >> 4 add pxa270 directory under cpu/ with cpu/pxa >> cp -a pxa pxa270 >> 5 modified config.mk under cpu/pxa270/ >> PLATFORM_CPPFLAGS += -mapcs-32 -march=armv5 -mtune=xscale >> 6 add my board information into mach-types.h >> 7 modified start.S(cpu/pxa270) with blob's start.S and >> xlli_LowLev_Init.s >> ps: this blob could run on my board. >> and I compiled with arm-linux-gcc 3.4.1 >> At last the u-boot.bin couldn't run on my board. >> Could you give me some help, thank you very much. >> Best regards >> John >> >> _________________________________________________________________ >> > > FYI > > Here you can find some already done work: > http://www.koansoftware.com/en/prd_svil_projects.htm > > u-boot bootloader patch for Intel Mainstone > (aka HCDDBBVA0) with ethernet support > patched against 1.1.4 cvs > > Other resources are here: > http://pxa-linux.sourceforge.net > > HTH > Hi, U-Boot already support PXA270. I used ADSVIX for my port. regards Stefan