From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Koller Date: Tue, 29 May 2007 15:01:58 +0200 Subject: [U-Boot-Users] OT: problem with minicom, was: (Re: loads command is not working) In-Reply-To: <465C2027.8080004@smiths-aerospace.com> References: <20070526130851.B6D52353428@atlas.denx.de> <4659DD9B.6050004@box74238.elkhouse.de> <4659F597.7090506@anagramm.de> <465AAA1C.7050601@anagramm.de> <465C2027.8080004@smiths-aerospace.com> Message-ID: <465C2446.8080909@anagramm.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Jerry Jerry Van Baren schrieb: > The typical problem I have with minicom is that the tty port gets messed > up (baud rate, handshake, etc. is wrong) and minicom cannot recover it. > Minicom will tell you it is changing the port configuration (baud rate, > for instance) and say that the baud rate is what you set it to, but it > really isn't. This is a known issue, bug or feature: http://alioth.debian.org/tracker/index.php?func=detail&aid=301193&group_id=30018&atid=100031 > Interestingly, I've never had a problem getting kermit to reset the port > characteristics to a sane setting when this happens, and then minicom > will behave again, for a while. If you ran into a problem which is reproducable, please try to fix it and/or contact the developers of minicom to get it fixed. Regards, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Stra?e 45/1 Linhof Werksgel?nde D-81379 M?nchen Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com