From mboxrd@z Thu Jan  1 00:00:00 1970
From: Victor Librado <vlibrado@bioingenieria.es>
Date: Wed, 06 Jun 2007 18:33:47 +0200
Subject: [U-Boot-Users] u-boot on nadflash for at91sam9260ek
Message-ID: <4666E1EB.3080009@bioingenieria.es>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



Hello all,
I'm working with u-boot for booting in nandflash with the evaluation 
board atmel at91sam9260ek. Nandflash reads ok, but performing and erase 
doesn`t work.

I get these messages trying to erase a block of the nand and writing the 
environment variables to nandflash.

Any help? I'm missing a configuration parameter in config or what may 
happens?


U-Boot> saveenv
Saving Environment to NAND...
Erasing redundant Nand...Timeout!U-Boot>
U-Boot>


U-Boot> nand erase 0x60000 0x20000

NAND erase: device 0 offset 0x60000, size 0x20000
Timeout!
SAM NAND 256MiB 3,3V 8-bit: MTD Erase failure: -5

OK

 

 

 

Victor Librado Sancho
Departamento I+D
------------------------------------------------------------------------