From: Ingo Swieter <ingo.swieter@brunel.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] bootm shows Kernel info but reset
Date: Thu, 14 Jun 2007 13:21:58 +0200 [thread overview]
Message-ID: <467124D6.2080105@brunel.de> (raw)
Hello,
i have a problem starting Linux from U-Boot.
I compile my Linux-Kernel with the make uImage command
and copy it to my tftpboot directory.
With U-Boot i can load the image through tftp and the
bootm command shows the correct information. But after
a while, around half second, it restarts U-Boot again.
Do you have any hint for that problem?
Best Regards,
Ingo
---
# t 100000 uImage
Using FEC ETHERNET device
TFTP from server 172.16.102.78; our IP address is 172.16.102.79
Filename 'uImage'.
Load address: 0x100000
Loading: #################################################################
#################################################################
###
done
Bytes transferred = 679637 (a5ed5 hex)
# bootm 100000
## Booting image at 00100000 ...
Image Name: Linux-2.4.25
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 679573 Bytes = 663.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
U-Boot 1.2.0 (Jun 14 2007 - 11:03:06) BCS_EPDEV_P01-00
CPU: MPC885ZPnn at 100 MHz [40.0...133.0 MHz]
8 kB I-Cache 8 kB D-Cache FEC present
Board: EP88xC 1.1 CPLD revision 2
Watchdog enabled
DRAM: 64 MB
FLASH: 32 MB
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET, FEC2 ETHERNET
#
--
Ingo Swieter
Tel: 05121/1760-821
Mail: ingo.swieter at brunel.de
Brunel GmbH
Bereich Communications
Daimlerring 9
31135 Hildesheim
Fax: 05121/1760-999
Internet: http://www.brunel.de
Hauptsitz: Airport City, Hermann-K?hl-Str. 1 a, 28199 Bremen
Amtsgericht Bremen HRB 16935
General Manager: Carsten Siebeneich
next reply other threads:[~2007-06-14 11:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-14 11:21 Ingo Swieter [this message]
2007-06-14 16:34 ` [U-Boot-Users] bootm shows Kernel info but reset Leonid
2007-06-18 10:54 ` Ingo Swieter
2007-06-14 21:23 ` Wolfgang Denk
2007-06-18 11:02 ` Ingo Swieter
2007-06-19 22:22 ` Thomas Jansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=467124D6.2080105@brunel.de \
--to=ingo.swieter@brunel.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox