[U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Dear Marek Vasut,

On Friday, April 19, 2013 6:10:51 AM, Marek Vasut wrote:
> Add support for generic NAND SPL via the SPL framework into the
> mxc_nand_spl driver. This is basically just a simple rename and
> publication of the already implemented functions. To avoid the
> old function which are used with the nand_spl/ stuff getting in
> the way of NAND SPL framework, the macro CONFIG_SPL_NAND_LEGACY
> was introduced and two remaining legacy boards were adjusted.
> These board need to be either fixed or removed in the long run,
> but I don't have either.
> 
> Also make sure the requested payload is aligned to full pages,
> otherwise this simple driver fails to load the last page.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> Cc: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Scott Wood <scottwood@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Tom Rini <trini@ti.com>
> ---
>  drivers/mtd/nand/mxc_nand_spl.c | 13 ++++++++++---
>  include/configs/mx31pdk.h       |  1 +
>  include/configs/tx25.h          |  1 +
>  3 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/mxc_nand_spl.c
> b/drivers/mtd/nand/mxc_nand_spl.c
> index 09f23c3..8ff03c9 100644
> --- a/drivers/mtd/nand/mxc_nand_spl.c
> +++ b/drivers/mtd/nand/mxc_nand_spl.c
> @@ -290,7 +290,7 @@ static int is_badblock(int pagenumber)
>  	return 0;
>  }
>  
> -static int nand_load(unsigned int from, unsigned int size, unsigned char
> *buf)
> +int nand_spl_load_image(uint32_t from, unsigned int size, void *buf)
>  {
>  	int i;
>  	unsigned int page;
> @@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned int
> size, unsigned char *buf)
>  	page = from / CONFIG_SYS_NAND_PAGE_SIZE;
>  	i = 0;
>  
> +	size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE);
>  	while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) {
>  		if (nfc_read_page(page, buf) < 0)
>  			return -1;
> @@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned int
> size, unsigned char *buf)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_SPL_NAND_SUPPORT_LEGACY
>  /*
>   * The main entry for NAND booting. It's necessary that SDRAM is already
>   * configured and available since this code loads the main U-Boot image
> @@ -345,8 +347,9 @@ void nand_boot(void)
>  	 * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
>  	 * be aligned to full pages
>  	 */
> -	if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
> -		       (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
> +	if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
> +			CONFIG_SYS_NAND_U_BOOT_SIZE,
> +			(uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
>  		/* Copy from NAND successful, start U-boot */
>  		uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
>  		uboot();
> @@ -364,3 +367,7 @@ void hang(void)
>  	/* Loop forever */
>  	while (1) ;
>  }
> +#endif
> +
> +void nand_init(void) {}
> +void nand_deselect(void) {}
> diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
> index 1754595..217552e 100644
> --- a/include/configs/mx31pdk.h
> +++ b/include/configs/mx31pdk.h
> @@ -50,6 +50,7 @@
>  #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
>  #define CONFIG_SPL_MAX_SIZE	2048
>  #define CONFIG_SPL_NAND_SUPPORT
> +#define CONFIG_SPL_NAND_SUPPORT_LEGACY
>  
>  #define CONFIG_SPL_TEXT_BASE	0x87dc0000
>  #define CONFIG_SYS_TEXT_BASE	0x87e00000
> diff --git a/include/configs/tx25.h b/include/configs/tx25.h
> index e72f8f6..7c362d0 100644
> --- a/include/configs/tx25.h
> +++ b/include/configs/tx25.h
> @@ -37,6 +37,7 @@
>  #define CONFIG_SPL_LDSCRIPT		"arch/$(ARCH)/cpu/u-boot-spl.lds"
>  #define CONFIG_SPL_MAX_SIZE		2048
>  #define CONFIG_SPL_NAND_SUPPORT
> +#define CONFIG_SPL_NAND_SUPPORT_LEGACY
>  
>  #define CONFIG_SPL_TEXT_BASE		0x810c0000
>  #define CONFIG_SYS_TEXT_BASE		0x81200000
> --
> 1.7.11.7

This is not about legacy vs. non-legacy. This is about basic vs. more featured
SPL because of SPL size constraints. So what about dropping
CONFIG_SPL_NAND_SUPPORT_LEGACY and testing for CONFIG_SPL_FRAMEWORK definition
instead?

Best regards,
Beno?t