From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Koller Date: Thu, 28 Jun 2007 19:15:12 +0200 Subject: [U-Boot-Users] Ethnet doesn't work [OT] In-Reply-To: <001f01c7b92f$8f48e8b0$3400a8c0@xgw> References: <001f01c7b92f$8f48e8b0$3400a8c0@xgw> Message-ID: <4683ECA0.80209@anagramm.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, disonlo! disonlo schrieb: > Does anybody know about Marvell 88E1118 chip? I meet a issue about it. We > make a board based on Marvell5182, but differs with the demo board. We use 88E1118 > instead of 88E1111 on demo board, when connecting the board to the 100M switcher via > the ethnet port, I can't PING other addresses, but when connecting it to the 1000M > switcher, I can PING other addresses. Without schematics it's hard to tell, but it seems like a hardware issue. You could propably check the LED/CONFIG pins if the PHY comes in the right autonegotiation mode which you propably need. This seems to be OT here. Regards, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Stra?e 45/1 Linhof Werksgel?nde D-81379 M?nchen Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com