From: John Traill <john.traill@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
Date: Wed, 04 Jul 2007 08:56:30 +0100 [thread overview]
Message-ID: <468B52AE.5070605@freescale.com> (raw)
In-Reply-To: <E1I5lB8-0002rt-6B@mail.sourceforge.net>
eran.liberty at gmail.com wrote:
> Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
>
> Index: drivers/tsec.c
> ===================================================================
> --- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> @@ -900,6 +900,39 @@
> phy_run_commands(priv, priv->phyinfo->shutdown);
> }
>
> +struct phy_info phy_info_M88E1149S = {
> + 0x1410ca,
> + "Marvell 88E1149S",
> + 4,
> + (struct phy_cmd[]){ /* config */
> + /* Reset and configure the PHY */
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {0x1d, 0x1f, NULL},
> + {0x1e, 0x200c, NULL},
> + {0x1d, 0x5, NULL},
> + {0x1e, 0x0, NULL},
> + {0x1e, 0x100, NULL},
I believe the above five writes were only required for an Errata on an 88E1011
device and are not applicable to new devices.
> + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + /* Status is read once to clear old link state */
> + {MIIM_STATUS, miim_read, NULL},
> + /* Auto-negotiate */
> + {MIIM_STATUS, miim_read, &mii_parse_sr},
> + /* Read the status */
> + {MIIM_88E1011_PHY_STATUS, miim_read,
> + &mii_parse_88E1011_psr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + },
> +};
> +
> /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> struct phy_info phy_info_BCM5461S = {
> 0x02060c1, /* 5461 ID */
> @@ -1293,6 +1326,7 @@
> &phy_info_cis8201,
> &phy_info_BCM5461S,
> &phy_info_M88E1011S,
> + &phy_info_M88E1149S,
> &phy_info_M88E1111S,
> &phy_info_M88E1145,
> &phy_info_dm9161,
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
--
John Traill
Systems Engineer
Network and Computing Systems Group
Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland
Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790
E-mail: john.traill at freescale.com
Registration Number: SC262720
VAT Number: GB831329053
[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary
next prev parent reply other threads:[~2007-07-04 7:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-03 16:24 [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c eran.liberty at gmail.com
2007-07-03 17:23 ` Grant Likely
2007-07-04 7:56 ` John Traill [this message]
2007-07-04 9:10 ` eran liberty
2007-07-04 9:35 ` John Traill
2007-07-04 15:29 ` eran liberty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468B52AE.5070605@freescale.com \
--to=john.traill@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox