* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
@ 2007-07-03 16:24 eran.liberty at gmail.com
2007-07-03 17:23 ` Grant Likely
2007-07-04 7:56 ` John Traill
0 siblings, 2 replies; 6+ messages in thread
From: eran.liberty at gmail.com @ 2007-07-03 16:24 UTC (permalink / raw)
To: u-boot
Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
Index: drivers/tsec.c
===================================================================
--- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
+++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
@@ -900,6 +900,39 @@
phy_run_commands(priv, priv->phyinfo->shutdown);
}
+struct phy_info phy_info_M88E1149S = {
+ 0x1410ca,
+ "Marvell 88E1149S",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
struct phy_info phy_info_BCM5461S = {
0x02060c1, /* 5461 ID */
@@ -1293,6 +1326,7 @@
&phy_info_cis8201,
&phy_info_BCM5461S,
&phy_info_M88E1011S,
+ &phy_info_M88E1149S,
&phy_info_M88E1111S,
&phy_info_M88E1145,
&phy_info_dm9161,
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
2007-07-03 16:24 [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c eran.liberty at gmail.com
@ 2007-07-03 17:23 ` Grant Likely
2007-07-04 7:56 ` John Traill
1 sibling, 0 replies; 6+ messages in thread
From: Grant Likely @ 2007-07-03 17:23 UTC (permalink / raw)
To: u-boot
On 7/3/07, eran.liberty at gmail.com <eran.liberty@gmail.com> wrote:
> Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
Hmmm; this PHY stuff should really common between all drivers... but
that's not a comment on your patch.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
>
> Index: drivers/tsec.c
> ===================================================================
> --- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> @@ -900,6 +900,39 @@
> phy_run_commands(priv, priv->phyinfo->shutdown);
> }
>
> +struct phy_info phy_info_M88E1149S = {
> + 0x1410ca,
> + "Marvell 88E1149S",
> + 4,
> + (struct phy_cmd[]){ /* config */
> + /* Reset and configure the PHY */
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {0x1d, 0x1f, NULL},
> + {0x1e, 0x200c, NULL},
> + {0x1d, 0x5, NULL},
> + {0x1e, 0x0, NULL},
> + {0x1e, 0x100, NULL},
> + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + /* Status is read once to clear old link state */
> + {MIIM_STATUS, miim_read, NULL},
> + /* Auto-negotiate */
> + {MIIM_STATUS, miim_read, &mii_parse_sr},
> + /* Read the status */
> + {MIIM_88E1011_PHY_STATUS, miim_read,
> + &mii_parse_88E1011_psr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + },
> +};
> +
> /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> struct phy_info phy_info_BCM5461S = {
> 0x02060c1, /* 5461 ID */
> @@ -1293,6 +1326,7 @@
> &phy_info_cis8201,
> &phy_info_BCM5461S,
> &phy_info_M88E1011S,
> + &phy_info_M88E1149S,
> &phy_info_M88E1111S,
> &phy_info_M88E1145,
> &phy_info_dm9161,
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
2007-07-03 16:24 [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c eran.liberty at gmail.com
2007-07-03 17:23 ` Grant Likely
@ 2007-07-04 7:56 ` John Traill
2007-07-04 9:10 ` eran liberty
1 sibling, 1 reply; 6+ messages in thread
From: John Traill @ 2007-07-04 7:56 UTC (permalink / raw)
To: u-boot
eran.liberty at gmail.com wrote:
> Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
>
> Index: drivers/tsec.c
> ===================================================================
> --- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> @@ -900,6 +900,39 @@
> phy_run_commands(priv, priv->phyinfo->shutdown);
> }
>
> +struct phy_info phy_info_M88E1149S = {
> + 0x1410ca,
> + "Marvell 88E1149S",
> + 4,
> + (struct phy_cmd[]){ /* config */
> + /* Reset and configure the PHY */
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {0x1d, 0x1f, NULL},
> + {0x1e, 0x200c, NULL},
> + {0x1d, 0x5, NULL},
> + {0x1e, 0x0, NULL},
> + {0x1e, 0x100, NULL},
I believe the above five writes were only required for an Errata on an 88E1011
device and are not applicable to new devices.
> + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* startup */
> + /* Status is read once to clear old link state */
> + {MIIM_STATUS, miim_read, NULL},
> + /* Auto-negotiate */
> + {MIIM_STATUS, miim_read, &mii_parse_sr},
> + /* Read the status */
> + {MIIM_88E1011_PHY_STATUS, miim_read,
> + &mii_parse_88E1011_psr},
> + {miim_end,}
> + },
> + (struct phy_cmd[]){ /* shutdown */
> + {miim_end,}
> + },
> +};
> +
> /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> struct phy_info phy_info_BCM5461S = {
> 0x02060c1, /* 5461 ID */
> @@ -1293,6 +1326,7 @@
> &phy_info_cis8201,
> &phy_info_BCM5461S,
> &phy_info_M88E1011S,
> + &phy_info_M88E1149S,
> &phy_info_M88E1111S,
> &phy_info_M88E1145,
> &phy_info_dm9161,
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
--
John Traill
Systems Engineer
Network and Computing Systems Group
Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland
Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790
E-mail: john.traill at freescale.com
Registration Number: SC262720
VAT Number: GB831329053
[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
2007-07-04 7:56 ` John Traill
@ 2007-07-04 9:10 ` eran liberty
2007-07-04 9:35 ` John Traill
0 siblings, 1 reply; 6+ messages in thread
From: eran liberty @ 2007-07-04 9:10 UTC (permalink / raw)
To: u-boot
On 7/4/07, John Traill <john.traill@freescale.com> wrote:
> eran.liberty at gmail.com wrote:
> > Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
> >
> > Index: drivers/tsec.c
> > ===================================================================
> > --- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> > +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> > @@ -900,6 +900,39 @@
> > phy_run_commands(priv, priv->phyinfo->shutdown);
> > }
> >
> > +struct phy_info phy_info_M88E1149S = {
> > + 0x1410ca,
> > + "Marvell 88E1149S",
> > + 4,
> > + (struct phy_cmd[]){ /* config */
> > + /* Reset and configure the PHY */
> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> > + {0x1d, 0x1f, NULL},
> > + {0x1e, 0x200c, NULL},
> > + {0x1d, 0x5, NULL},
> > + {0x1e, 0x0, NULL},
> > + {0x1e, 0x100, NULL},
> I believe the above five writes were only required for an Errata on an 88E1011
> device and are not applicable to new devices.
I do not really understand the values I added. (not a phy expert)
I needed a entry that identify itself as Marvell 88E1149S. so i
copy-paste from the 88E1011 entry.
It works as is!
Tell me what needs to be cut out and I will try it.
> > + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> > + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> > + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> > + {miim_end,}
> > + },
> > + (struct phy_cmd[]){ /* startup */
> > + /* Status is read once to clear old link state */
> > + {MIIM_STATUS, miim_read, NULL},
> > + /* Auto-negotiate */
> > + {MIIM_STATUS, miim_read, &mii_parse_sr},
> > + /* Read the status */
> > + {MIIM_88E1011_PHY_STATUS, miim_read,
> > + &mii_parse_88E1011_psr},
> > + {miim_end,}
> > + },
> > + (struct phy_cmd[]){ /* shutdown */
> > + {miim_end,}
> > + },
> > +};
> > +
> > /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> > struct phy_info phy_info_BCM5461S = {
> > 0x02060c1, /* 5461 ID */
> > @@ -1293,6 +1326,7 @@
> > &phy_info_cis8201,
> > &phy_info_BCM5461S,
> > &phy_info_M88E1011S,
> > + &phy_info_M88E1149S,
> > &phy_info_M88E1111S,
> > &phy_info_M88E1145,
> > &phy_info_dm9161,
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > U-Boot-Users mailing list
> > U-Boot-Users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
> --
> John Traill
> Systems Engineer
> Network and Computing Systems Group
>
> Freescale Semiconductor UK LTD
> Colvilles Road
> East Kilbride
> Glasgow G75 0TG, Scotland
>
> Tel: +44 (0) 1355 355494
> Fax: +44 (0) 1355 261790
>
> E-mail: john.traill at freescale.com
>
> Registration Number: SC262720
> VAT Number: GB831329053
>
> [ ] General Business Use
> [ ] Freescale Internal Use Only
> [ ] Freescale Confidential Proprietary
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
2007-07-04 9:10 ` eran liberty
@ 2007-07-04 9:35 ` John Traill
2007-07-04 15:29 ` eran liberty
0 siblings, 1 reply; 6+ messages in thread
From: John Traill @ 2007-07-04 9:35 UTC (permalink / raw)
To: u-boot
Eran,
eran liberty wrote:
> On 7/4/07, John Traill <john.traill@freescale.com> wrote:
>> eran.liberty at gmail.com wrote:
>> > Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
>> >
>> > Index: drivers/tsec.c
>> > ===================================================================
>> > --- drivers/tsec.c
>> (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
>> > +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
>> > @@ -900,6 +900,39 @@
>> > phy_run_commands(priv, priv->phyinfo->shutdown);
>> > }
>> >
>> > +struct phy_info phy_info_M88E1149S = {
>> > + 0x1410ca,
>> > + "Marvell 88E1149S",
>> > + 4,
>> > + (struct phy_cmd[]){ /* config */
>> > + /* Reset and configure the PHY */
>> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
>> > + {0x1d, 0x1f, NULL},
>> > + {0x1e, 0x200c, NULL},
>> > + {0x1d, 0x5, NULL},
>> > + {0x1e, 0x0, NULL},
>> > + {0x1e, 0x100, NULL},
>> I believe the above five writes were only required for an Errata on an
>> 88E1011
>> device and are not applicable to new devices.
>
> I do not really understand the values I added. (not a phy expert)
> I needed a entry that identify itself as Marvell 88E1149S. so i
> copy-paste from the 88E1011 entry.
> It works as is!
> Tell me what needs to be cut out and I will try it.
I'm not an expert on phys but I believe the following :-
>> > + {0x1d, 0x1f, NULL},
>> > + {0x1e, 0x200c, NULL},
>> > + {0x1d, 0x5, NULL},
>> > + {0x1e, 0x0, NULL},
>> > + {0x1e, 0x100, NULL},
Has been cut'n'pasted from the 88E1011 entry but does not apply to other Marvell
phys. Try removing the above lines and see if it still works.
>
>> > + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT,
>> NULL},
>> > + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
>> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
>> > + {MIIM_CONTROL, MIIM_CONTROL_INIT,
>> &mii_cr_init},
>> > + {miim_end,}
>> > + },
>> > + (struct phy_cmd[]){ /* startup */
>> > + /* Status is read once to clear old link
>> state */
>> > + {MIIM_STATUS, miim_read, NULL},
>> > + /* Auto-negotiate */
>> > + {MIIM_STATUS, miim_read, &mii_parse_sr},
>> > + /* Read the status */
>> > + {MIIM_88E1011_PHY_STATUS, miim_read,
>> > + &mii_parse_88E1011_psr},
>> > + {miim_end,}
>> > + },
>> > + (struct phy_cmd[]){ /* shutdown */
>> > + {miim_end,}
>> > + },
>> > +};
>> > +
>> > /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
>> > struct phy_info phy_info_BCM5461S = {
>> > 0x02060c1, /* 5461 ID */
>> > @@ -1293,6 +1326,7 @@
>> > &phy_info_cis8201,
>> > &phy_info_BCM5461S,
>> > &phy_info_M88E1011S,
>> > + &phy_info_M88E1149S,
>> > &phy_info_M88E1111S,
>> > &phy_info_M88E1145,
>> > &phy_info_dm9161,
>> >
>> >
>> >
>> -------------------------------------------------------------------------
>> > This SF.net email is sponsored by DB2 Express
>> > Download DB2 Express C - the FREE version of DB2 express and take
>> > control of your XML. No limits. Just data. Click to get it now.
>> > http://sourceforge.net/powerbar/db2/
>> > _______________________________________________
>> > U-Boot-Users mailing list
>> > U-Boot-Users at lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
>>
>> --
>> John Traill
>> Systems Engineer
>> Network and Computing Systems Group
>>
>> Freescale Semiconductor UK LTD
>> Colvilles Road
>> East Kilbride
>> Glasgow G75 0TG, Scotland
>>
>> Tel: +44 (0) 1355 355494
>> Fax: +44 (0) 1355 261790
>>
>> E-mail: john.traill at freescale.com
>>
>> Registration Number: SC262720
>> VAT Number: GB831329053
>>
>> [ ] General Business Use
>> [ ] Freescale Internal Use Only
>> [ ] Freescale Confidential Proprietary
>>
--
John Traill
Systems Engineer
Network and Computing Systems Group
Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland
Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790
E-mail: john.traill at freescale.com
Registration Number: SC262720
VAT Number: GB831329053
[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
2007-07-04 9:35 ` John Traill
@ 2007-07-04 15:29 ` eran liberty
0 siblings, 0 replies; 6+ messages in thread
From: eran liberty @ 2007-07-04 15:29 UTC (permalink / raw)
To: u-boot
On 7/4/07, John Traill <john.traill@freescale.com> wrote:
> Eran,
>
> eran liberty wrote:
> > On 7/4/07, John Traill <john.traill@freescale.com> wrote:
> >> eran.liberty at gmail.com wrote:
> >> > Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
> >> >
> >> > Index: drivers/tsec.c
> >> > ===================================================================
> >> > --- drivers/tsec.c
> >> (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> >> > +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> >> > @@ -900,6 +900,39 @@
> >> > phy_run_commands(priv, priv->phyinfo->shutdown);
> >> > }
> >> >
> >> > +struct phy_info phy_info_M88E1149S = {
> >> > + 0x1410ca,
> >> > + "Marvell 88E1149S",
> >> > + 4,
> >> > + (struct phy_cmd[]){ /* config */
> >> > + /* Reset and configure the PHY */
> >> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> >> > + {0x1d, 0x1f, NULL},
> >> > + {0x1e, 0x200c, NULL},
> >> > + {0x1d, 0x5, NULL},
> >> > + {0x1e, 0x0, NULL},
> >> > + {0x1e, 0x100, NULL},
> >> I believe the above five writes were only required for an Errata on an
> >> 88E1011
> >> device and are not applicable to new devices.
> >
> > I do not really understand the values I added. (not a phy expert)
> > I needed a entry that identify itself as Marvell 88E1149S. so i
> > copy-paste from the 88E1011 entry.
> > It works as is!
> > Tell me what needs to be cut out and I will try it.
> I'm not an expert on phys but I believe the following :-
>
> >> > + {0x1d, 0x1f, NULL},
> >> > + {0x1e, 0x200c, NULL},
> >> > + {0x1d, 0x5, NULL},
> >> > + {0x1e, 0x0, NULL},
> >> > + {0x1e, 0x100, NULL},
>
> Has been cut'n'pasted from the 88E1011 entry but does not apply to other Marvell
> phys. Try removing the above lines and see if it still works.
>
It works :)
Thanks.
Patch follows
Liberty
> >
> >> > + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT,
> >> NULL},
> >> > + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> >> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> >> > + {MIIM_CONTROL, MIIM_CONTROL_INIT,
> >> &mii_cr_init},
> >> > + {miim_end,}
> >> > + },
> >> > + (struct phy_cmd[]){ /* startup */
> >> > + /* Status is read once to clear old link
> >> state */
> >> > + {MIIM_STATUS, miim_read, NULL},
> >> > + /* Auto-negotiate */
> >> > + {MIIM_STATUS, miim_read, &mii_parse_sr},
> >> > + /* Read the status */
> >> > + {MIIM_88E1011_PHY_STATUS, miim_read,
> >> > + &mii_parse_88E1011_psr},
> >> > + {miim_end,}
> >> > + },
> >> > + (struct phy_cmd[]){ /* shutdown */
> >> > + {miim_end,}
> >> > + },
> >> > +};
> >> > +
> >> > /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> >> > struct phy_info phy_info_BCM5461S = {
> >> > 0x02060c1, /* 5461 ID */
> >> > @@ -1293,6 +1326,7 @@
> >> > &phy_info_cis8201,
> >> > &phy_info_BCM5461S,
> >> > &phy_info_M88E1011S,
> >> > + &phy_info_M88E1149S,
> >> > &phy_info_M88E1111S,
> >> > &phy_info_M88E1145,
> >> > &phy_info_dm9161,
> >> >
> >> >
> >> >
> >> -------------------------------------------------------------------------
> >> > This SF.net email is sponsored by DB2 Express
> >> > Download DB2 Express C - the FREE version of DB2 express and take
> >> > control of your XML. No limits. Just data. Click to get it now.
> >> > http://sourceforge.net/powerbar/db2/
> >> > _______________________________________________
> >> > U-Boot-Users mailing list
> >> > U-Boot-Users at lists.sourceforge.net
> >> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
> >>
> >> --
> >> John Traill
> >> Systems Engineer
> >> Network and Computing Systems Group
> >>
> >> Freescale Semiconductor UK LTD
> >> Colvilles Road
> >> East Kilbride
> >> Glasgow G75 0TG, Scotland
> >>
> >> Tel: +44 (0) 1355 355494
> >> Fax: +44 (0) 1355 261790
> >>
> >> E-mail: john.traill at freescale.com
> >>
> >> Registration Number: SC262720
> >> VAT Number: GB831329053
> >>
> >> [ ] General Business Use
> >> [ ] Freescale Internal Use Only
> >> [ ] Freescale Confidential Proprietary
> >>
>
> --
> John Traill
> Systems Engineer
> Network and Computing Systems Group
>
> Freescale Semiconductor UK LTD
> Colvilles Road
> East Kilbride
> Glasgow G75 0TG, Scotland
>
> Tel: +44 (0) 1355 355494
> Fax: +44 (0) 1355 261790
>
> E-mail: john.traill at freescale.com
>
> Registration Number: SC262720
> VAT Number: GB831329053
>
> [ ] General Business Use
> [ ] Freescale Internal Use Only
> [ ] Freescale Confidential Proprietary
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-07-04 15:29 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-03 16:24 [U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c eran.liberty at gmail.com
2007-07-03 17:23 ` Grant Likely
2007-07-04 7:56 ` John Traill
2007-07-04 9:10 ` eran liberty
2007-07-04 9:35 ` John Traill
2007-07-04 15:29 ` eran liberty
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox