From mboxrd@z Thu Jan 1 00:00:00 1970 From: llandre Date: Mon, 16 Jul 2007 10:26:44 +0200 Subject: [U-Boot-Users] Variable bootfile can't be modified [SOLVED] In-Reply-To: <466FF29A.2080606@dave-tech.it> References: <466FF29A.2080606@dave-tech.it> Message-ID: <469B2BC4.20907@dave-tech.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de CONFIG_EXTRA_ENV_SETTINGS erroneously defined bootfile twice. Regards, llandre DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&d2 at dave-tech.it > Hi all, > > I'm experiencing a weird problem with current U-Boot sources. > Variable bootfile can't be modified as expected. > When the board boots, bootfile looks like this: > > bootfile=parsy/prelk/uImage > > If I change it, the new value is appended to the env but old value in > not deleted: > > parsy> setenv bootfile abc > parsy> print bootfile > bootfile=parsy/prelk/uImage > parsy> print > bootdelay=3 > baudrate=115200 > ... > bootfile=parsy/prelk/uImage > ... > stdin=serial > stdout=serial > stderr=serial > bootfile=abc > > Environment size: 1381/131067 bytes > parsy> > > Then If I issue manually > setenv bootfile > the first occurrence is deleted. > If I issue the same command again the second occurrence (abc) is deleted. > > Anybody experienced similar problems? > > > > TIA > llandre > > DAVE Electronics System House - R&D Department > web: http://www.dave-tech.it > email: r&d2 at dave-tech.it > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > >