[U-Boot-Users] mpc8313erdb

robert lazarski
2007-08-01T21:15:08Z

On 8/1/07, Scott Wood <scottwood@freescale.com> wrote:
> robert lazarski wrote:
> > I can't seem to find support for the mpc8313erdb in the latest u-boot
> > distro. I used grep through the sources and can't find anything like
> > CONFIG_MPC8313 . Any clues please? (perhaps off topic, but I pulled
> > the freescale git repo and couldn't find it there either).
>
> Did you look in include/configs/MPC8313ERDB.h and board/mpc8313erdb?
>
> -Scott
>

Its in the u-boot git repo but not in 1.2.0 - my bad. I was looking to
see if there is any eTSEC coding for the Marvell 88E1111 single port
GBE PHY that is connected to eTSEC2.

I have a custom 85xx board that has the 88E1111 on TSEC3 and on TSEC4
in which I plan on using the same drivers - gianfar et all - that the
MPC8313ERDB is using. For example, the MPC8548CDS board does have
coding in u-boot for RGMII .

Looking at the mpc8313erdb.c code, it didn't see anything extra is
needed for RGMII and getting the gianfar driver loaded. I see some
general TSEC #define in MPC8313ERDB.h , would you be able to say if
there's anything there particular to the Marvell 88E1111 ?

Thanks!
Robert