From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Wed, 08 Aug 2007 06:32:47 +0200 Subject: [U-Boot-Users] DaVinci serial boot utility, was: TI DaVinci support, 2nd attempt [0/5] In-Reply-To: References: <5CBE65F7D9232C47861CB09B0954861C2FD8F8@MAIL.infinitychannel.local> <5CBE65F7D9232C47861CB09B0954861C2FD8F9@MAIL.infinitychannel.local> Message-ID: <46B9476F.1050502@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de ksi at koi8.net wrote: > On Mon, 6 Aug 2007, Zach Sadecki wrote: > >>Sergey, >> You mentioned in a previous post that you had a serial boot utility >>you wrote to get away from the C# one that TI has... Did you write that >>in C? Could you share it with the list, since it would be most helpful >>to those of us who work with Davinci boards. > > > It is partially in C and partially in Assembly. I would like to share it but > it is quite messy right now, code requires a good cleanup. Unfortunately I > don't have time right now, I'm extremely busy with bringing up prototype > boards that just came in... We're very short in time so I have to get them > up and running asap and give out a list of required changes and fixes for > the final prototypes and then go into production... > > So I will do it later, when that pressure is somehow lessened... Maybe you can consider to send it as it is to davinci-linux-open-source list, probably marked as 'experimental'? If you like, then people can test, use and help to improve it. You know this "release early, release often"? ;) I could imagine to create a page in DaVinci wiki with howto use, list of shortcomings and things to fix, then. Best regards Dirk