From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Hawkins <dwh@ovro.caltech.edu>
Date: Mon, 13 Aug 2007 14:46:32 -0700
Subject: [U-Boot-Users] [OT] 10/100/1000 TSEC LED meanings
In-Reply-To: <DCEAAC0833DD314AB0B58112AD99B93B07B449@ismail.innsys.innovsys.com>
References: <20070810180407.5315A353DB4@atlas.denx.de>
	<46BE5C2A.7020001@ovro.caltech.edu>
	<DCEAAC0833DD314AB0B58112AD99B93B07B449@ismail.innsys.innovsys.com>
Message-ID: <46C0D138.2060805@ovro.caltech.edu>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Rune,

>  >What do people find is the most useful combination
>  >of LED colors and blinking?
> 
> We use green for 1000, yellow for 100 and off for 10, and only green for 
> combined rx/tx/activity, as it is kinda hard to do yellow/green at the 
> same time with a two-pin bipolar LED.
> (This driven from a 88E1145 quad phy)
> 

Ok, I'll go this route too.

  * bi-color for 10/100/1000 (off/yellow/green)
  * green driven by the logical 'and' of LED_TX and LED_RX
    to indicate activity

Thanks!
Dave