* [U-Boot-Users] 85xx and flash.c
@ 2007-08-24 13:50 robert lazarski
2007-08-24 13:52 ` Ben Warren
0 siblings, 1 reply; 2+ messages in thread
From: robert lazarski @ 2007-08-24 13:50 UTC (permalink / raw)
To: u-boot
Hi all, I'm reading the docs and it says that when porting a new board
- mine is a custom 8548 - a flash.c is needed. Indeed, most boards
have a flash.c but I don't see one for the cds 85xx boards nor the
mpc8544ds . I was planning on using CFI for my flash - the spansion
S29GL01GP . Do I need a flash.c and if so what reference should I use
to get started?
Thanks!
Robert
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] 85xx and flash.c
2007-08-24 13:50 [U-Boot-Users] 85xx and flash.c robert lazarski
@ 2007-08-24 13:52 ` Ben Warren
0 siblings, 0 replies; 2+ messages in thread
From: Ben Warren @ 2007-08-24 13:52 UTC (permalink / raw)
To: u-boot
Robert,
robert lazarski wrote:
> Hi all, I'm reading the docs and it says that when porting a new board
> - mine is a custom 8548 - a flash.c is needed. Indeed, most boards
> have a flash.c but I don't see one for the cds 85xx boards nor the
> mpc8544ds . I was planning on using CFI for my flash - the spansion
> S29GL01GP . Do I need a flash.c and if so what reference should I use
> to get started?
>
>
It looks like the docs need some updating. If you're using CFI you don't
need a flash.c file.
regards,
Ben
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-08-24 13:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-24 13:50 [U-Boot-Users] 85xx and flash.c robert lazarski
2007-08-24 13:52 ` Ben Warren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox