From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Koller Date: Fri, 07 Sep 2007 00:43:26 +0200 Subject: [U-Boot-Users] minimum bdi config to read flash on 85xx In-Reply-To: <50d8dde80709061403t576d0720lf1461bd6ee9e6730@mail.gmail.com> References: <46DDA35F.5000006@ovro.caltech.edu> <46DDB5CF.90006@qstreams.com> <46DDCAED.8080006@ovro.caltech.edu> <46DEDAC0.10602@ovro.caltech.edu> <46DF1D78.2000001@ovro.caltech.edu> <50d8dde80709061403t576d0720lf1461bd6ee9e6730@mail.gmail.com> Message-ID: <46E0828E.6060604@anagramm.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi there! Luiz Neto schrieb: > My opinion is we have mistakes on configuration file. I'm not sure if we > are configuring all registers correctly. > > Do you think it would be helpful if I send you our flash schematic and > our configuration file? I'm working with the MPC8540 doing lots of hardware stuff with flash and fpga on the local bus. I think I cannot help you much with the config file but I can compare your schematics with the stuff we have in house, if you want. Regards, -- Clemens Koller _______________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm-technology.com Phone: +49-89-741518-50 Fax: +49-89-741518-19