From: Andreas Schweigstill <andreas@schweigstill.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] R: Booting with attached BDI butnot alone (onlyICTRL remained in BDI cfg)
Date: Thu, 13 Sep 2007 17:15:49 +0200 [thread overview]
Message-ID: <46E95425.2030109@schweigstill.de> (raw)
In-Reply-To: <46E94835.40003@smiths-aerospace.com>
Hello!
Jerry Van Baren schrieb:
> Sounds like his board was damaged by operator error (improperly
> connecting to the BDI connector). My guess is that the pullup resistor
> lost its smoke.
I agree that the board may have been damaged by the operator. But
the pull-up resistor won't be damaged except from very high voltage.
Attaching a debug interface in the wrong direction probably may
destroy it if it gets its power supply from the target. If it has
its own supply (or gets it via USB from a PC) it can be possibly
that either negative voltages (target GND connected to debugger VCC)
or high voltages (target VCC connected to debugger GND) may be
applied to the JTAG/BDM signals on the target. Such voltages may
cause small defects to the silicon which show strange behaviour
afterwards.
Regards
Andreas Schweigstill
--
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems
Schauenburgerstra?e 116, D-24118 Kiel, Germany
Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/
prev parent reply other threads:[~2007-09-13 15:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-10 15:53 [U-Boot-Users] Booting with attached BDI but not alone DI BACCO ANTONIO - technolabs
2007-09-10 20:17 ` David Hawkins
2007-09-10 20:19 ` Ben Warren
2007-09-10 20:22 ` Wolfgang Denk
2007-09-11 8:33 ` w.wegner at astro-kom.de
2007-09-11 16:01 ` [U-Boot-Users] Booting with attached BDI but not alone (only ICTRL remained in BDI cfg) DI BACCO ANTONIO - technolabs
2007-09-11 16:16 ` [U-Boot-Users] Booting with attached BDI but not alone (onlyICTRL " DI BACCO ANTONIO - technolabs
2007-09-12 10:47 ` DI BACCO ANTONIO - technolabs
2007-09-12 19:59 ` [U-Boot-Users] R: " DI BACCO ANTONIO - technolabs
2007-09-12 20:09 ` David Hawkins
2007-09-13 10:57 ` DI BACCO ANTONIO - technolabs
2007-09-13 13:12 ` Andreas Schweigstill
2007-09-13 13:23 ` [U-Boot-Users] R: Booting with attached BDI butnot " DI BACCO ANTONIO - technolabs
2007-09-13 14:14 ` Andreas Schweigstill
2007-09-13 14:24 ` Jerry Van Baren
2007-09-13 15:15 ` Andreas Schweigstill [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46E95425.2030109@schweigstill.de \
--to=andreas@schweigstill.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox