[U-Boot-Users] Configuring Spansion flash

[Ben Warren <bwarren@qstreams.com>]

Yasothabalan Ramaswamy-TLS,Chennai wrote:
> Thanks Ben.
>  
> I checked out in my board and found the part number to be: 
>
> S29GL128N90-R2. (128Mb)
>
>   
OK. That's a good start. This is a very common flash type.
> Regards,
> Yasotha Balan R
>  
> -----Original Message-----
> From: Ben Warren [mailto:bwarren at qstreams.com] 
> Sent: Friday, September 14, 2007 7:54 PM
> To: Yasothabalan Ramaswamy-TLS,Chennai
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] Configuring Spansion flash
>
> Yasothabalan Ramaswamy-TLS,Chennai wrote:
>   
>> Hi all,
>>
>> I am using Lite5200B board with SPANSION type flash. UBoot code 
>> doesn't detect this flash.
>>
>>     
I don't know anything about this board or processor, but there are 
people here who do. Please elaborate on what you mean by 'U-boot code 
doesn't detect this flash', and provide details on the steps you've 
taken to reach this conclusion.

Also, please don't top-post. Post responses directly after the relevant 
parts of e-mail messages. The previously-mentioned curmudgeons will eat 
your children if you continue this habit.

regards,
Ben