From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Warren Date: Fri, 14 Sep 2007 11:00:36 -0400 Subject: [U-Boot-Users] Configuring Spansion flash In-Reply-To: References: <46EA996F.4010301@qstreams.com> Message-ID: <46EAA214.5030908@qstreams.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Yasothabalan Ramaswamy-TLS,Chennai wrote: > Thanks Ben. > > I checked out in my board and found the part number to be: > > S29GL128N90-R2. (128Mb) > > OK. That's a good start. This is a very common flash type. > Regards, > Yasotha Balan R > > -----Original Message----- > From: Ben Warren [mailto:bwarren at qstreams.com] > Sent: Friday, September 14, 2007 7:54 PM > To: Yasothabalan Ramaswamy-TLS,Chennai > Cc: u-boot-users at lists.sourceforge.net > Subject: Re: [U-Boot-Users] Configuring Spansion flash > > Yasothabalan Ramaswamy-TLS,Chennai wrote: > >> Hi all, >> >> I am using Lite5200B board with SPANSION type flash. UBoot code >> doesn't detect this flash. >> >> I don't know anything about this board or processor, but there are people here who do. Please elaborate on what you mean by 'U-boot code doesn't detect this flash', and provide details on the steps you've taken to reach this conclusion. Also, please don't top-post. Post responses directly after the relevant parts of e-mail messages. The previously-mentioned curmudgeons will eat your children if you continue this habit. regards, Ben