[U-Boot-Users] PATCH - Fix oob data copied into supplied buffer

[Troy Kisky <troy.kisky@boundarydevices.com>]

This patch correctly sets the oobavail variable
and fixes a bug where the oob data was not valid when
there where multiple groups in oobfree.
It also defines a new variable so that you can tell which
parts of a large page have ecc errors.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>


diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 151f535..45b8fb0 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -931,7 +931,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
  			for (i = 0; i < eccbytes; i++, eccidx++)
  				oob_buf[oob_config[eccidx]] = ecc_code[i];
  			/* If the hardware ecc provides syndromes then
-			 * the ecc code must be written immidiately after
+			 * the ecc code must be written immediately after
  			 * the data bytes (words) */
  			if (this->options & NAND_HWECC_SYNDROME)
  				this->write_buf(mtd, ecc_code, eccbytes);
@@ -1092,7 +1092,7 @@ static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * re
  	return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
  }

-
+ulong eccReadMask;	/* bitmask off ecc err groups*/
  /**
   * nand_read_ecc - [MTD Interface] Read data with ECC
   * @mtd:	MTD device structure
@@ -1267,6 +1267,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
  			ecc_code[j] = oob_data[oob_config[j]];

  		/* correct data, if neccecary */
+		eccReadMask = 0;
  		for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
  			ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);

@@ -1283,6 +1284,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
  			}

  			if (ecc_status == -1) {
+				eccReadMask |= (1<<i);
  				DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
  				ecc_failed++;
  			}
@@ -1299,7 +1301,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
  				for (i = 0, j = 0; j < mtd->oobavail; i++) {
  					int from = oobsel->oobfree[i][0];
  					int num = oobsel->oobfree[i][1];
-					memcpy(&oob_buf[oob], &oob_data[from], num);
+					memcpy(&oob_buf[oob+j], &oob_data[from], num);
  					j+= num;
  				}
  				oob += mtd->oobavail;
@@ -1644,8 +1646,10 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
  	this->select_chip(mtd, chipnr);

  	/* Check, if it is write protected */
-	if (nand_check_wp(mtd))
+	if (nand_check_wp(mtd)) {
+		printk (KERN_NOTICE "nand_write_ecc: Device is write protected\n");
  		goto out;
+	}

  	/* if oobsel is NULL, use chip defaults */
  	if (oobsel == NULL)
@@ -2486,12 +2490,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)

  	/* The number of bytes available for the filesystem to place fs dependend
  	 * oob data */
-	if (this->options & NAND_BUSWIDTH_16) {
-		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-		if (this->autooob->eccbytes & 0x01)
-			mtd->oobavail--;
-	} else
-		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
+	mtd->oobavail = 0;
+	for (i=0; this->autooob->oobfree[i][1]; i++)
+		mtd->oobavail += this->autooob->oobfree[i][1];

  	/*
  	 * check ECC mode, default to software